Recent content by deekay16v

  1. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    No, it´s not. "My" noise was like when you ride with the roof rack attached. Like wind whistling at it was RPM dependant. Can be heard from cca 5 to 7,5k.
  2. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    Little update again. Tried to reload Fastchip STG1 map on Toyo manifold.Results were slightly better but car still runs really sluggish and weird. Also there still were knocking sound and manifold developed some whistling sount in higher rpm. Maybe some leak, but it was pressure tested after...
  3. deekay16v

    Glacier White 200 Cup

    The first one looks like from Forza or some other Simracing game :D
  4. deekay16v

    Clio 3 RS F1 Team R27 Meglio - it will be a trackcar

    It does not look like nord-lock washers to me? Or have you just used half of the washer? Or is it just my eyes?
  5. deekay16v

    Glacier White 200 Cup

    I just love, how your car look on the track, one of my favourites here .. very nice stance :) Btw what spacer thickness do you run with CUP wheels?
  6. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    Thanks. I will have a look at RStuner, what it shows and make some logged runs. Maybe reload the Stg1 map.
  7. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    Well, got it fitted in the end. Nothing knocks when putting on power, but there is faint knocking sound when lifting off sometimes. Dunno what that is. Worse thing is, the car drives absolutelly crap. Its quite silent, compared to standard manifold with gutted precat, but the sound is bland...
  8. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    Chinese manufacturing tolerances are hit and miss i guess
  9. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    Thanks turkie. I hope it won't be neccesary, because its now set up that even with powerflexes it does not vibrate excesivelly, which was the case around certain RPM after i have fitted gearbox powerflex mount. Around 4000 it was unbearable, because it resonated through the whole chassis so it...
  10. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    I have everything powerflexed except main engine mount and there is NO clearance at all when tightened....managed to bend the manifold ang get 6mm of clearance...wonder if it will be enough.... buy cheap, buy twice I guess :( Lesson learned. Sad thing is, I dont see many other options, and many...
  11. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    And... it does not go exactly as planned :D Piece of chinese junk...
  12. deekay16v

    UltraRed 200 FF CUP - Weekend warrior

    So few updates. Ditched Goodyears Assymetric(front at minimum, and one on the rears had repaired puncture, so threw them away). Bridgestone Potenza sports are on. Wonder if they would last at least half a season :D Also managed to destroy my flexis after scraping my middle silencer over...
  13. deekay16v

    Will the steel synchro for 3-speed break?

    Have seen photos of those peeled off/desintegrated, but never seen on in person.
  14. deekay16v

    H&R Springs

    29103-2 are for "small dome" cars, so RS200 post 7/2010 i think. I have small dome and my front springs have designation 29103-2, and rears are just 29103. Maybe those manufactured before 2011 were just 29103, because 29103-2 did not exist at that time. But if you buy new springs, 29103-1...
  15. deekay16v

    Glacier White 200 Cup

    Do you guys measure/adjust the beam after welding strengthening plates,or just shim it out afterwards?