Chambers_rs's latest activity
-
Chambers_rs replied to the thread Alien Green 200 CUP.Thanks mate. Didn’t realise the link between you and Duct3d. -
@Chambers_rs drop me a message on here or on Instagram @duct3d if you need any help with your battery kit.
-
The missing bolt isn't an issue, my original engine didn't have anything there and the replacement has nothing there too. Headlights are...
-
Chambers_rs replied to the thread Alien Green 200 CUP.So stripping down the front end to remove the alternator found a few hidden issues that I hope won’t be the theme running through this...
-
-
Chambers_rs reacted to Jack Maxwell's post in the thread Clio 200 cup headlightwasher relay remove with
Like.
Ive 95% certain that they can be removed. I've got all the factory wiring diagrams that show they are for headlight washers. I also... -
Chambers_rs replied to the thread Silverstone Edition 200 - AST 5100.Mega looking car mate. A lot of what I have planned you’ve done so will be handy for me
-
Chambers_rs reacted to Jack Maxwell's post in the thread Silverstone Edition 200 - AST 5100 with Like.
Developed some judder a while back in the steering when braking at ~70mph and also when the brakes got hot. Turns out I managed to warp...
-
https://clio197.net/threads/silverstone-edition-200-ast-5100.57386/page-11 My thread shows where I put everything. Have to extend the...
-
Chambers_rs replied to the thread Alien Green 200 CUP.Yeah have the black plastic square box for the fuses etc. So all the cables attached to the positive battery post goes in there? Thanks...
-
Chambers_rs replied to the thread Alien Green 200 CUP.Looking at relocating the battery. What’s the best way to deal with these 3? I’ve pretty much got the Duct3D kit from my old car but...
-
-
Few things to update,removed the Scorpion rear silencer and went single exit,lighter and bit louder and much better deeper sound rather...
-
Bought a spare lower and upper intake to get ported/polished and powder coated,the gasket is pretty much the same size as the intake...
-
The original radiator support was getting rusty again and wanted to shed some weight with an ali box section so got one to modify...
-
Chambers_rs replied to the thread Clio 200 cup headlightwasher relay remove.Did you find the answer to this as I’d like to know also.
-
The tyres are on ready for a wet day at Donington Park. Four brand new tyres and fitting costing a little bit less than my usual...
