Renault Sport Clio 197 Racing Red

Same track... Very very fast driver i think... :smile:

[YOUTUBE]weArh7iHuj0[/YOUTUBE]

Nice video and nice driving. May I ask, where did he mount the camera and do you by any chance know what mount does this guy uses? That or something similar will be my next purchace I think...

Any by the way, you do get snow over there right?? Nice pic!
 
Some new things to play with:

DS2500:

FerodoDS2500FCP1667HClio197.jpg

Upper right ball joint:

DesnakuglaClio197_zps548df5e6.jpg

Both lower ball joints (instead of the hub carrier):

2013-02-21101647.jpg

2013-02-21101726.jpg

Will install it next week.
 
let us know what its like to change them :coffee:

were the ball joints via a renault dealer?
 
let us know what its like to change them :coffee:

were the ball joints via a renault dealer?

Will do. :wink:

Hmmmh...not quite - the dealers are fcking retarded so I had to go via the Renault Nissan Croatia with the part numbers I had from the Clio Cup/R3 catalogue.

All of them said that this part can't be ordered. It's because those parts are Renault Sport Competition (Alpina) and not "plain" RS. :blush:mg::blush:mg:
 
Will do. :wink:

Hmmmh...not quite - the dealers are fcking retarded so I had to go via the Renault Nissan Croatia with the part numbers I had from the Clio Cup/R3 catalogue.

All of them said that this part can't be ordered. It's because those parts are Renault Sport Competition (Alpina) and not "plain" RS. :blush:mg::blush:mg:

ah i see - i will have a word with my friendly renault part guru and see what is/isnt available :wiz:
 
Decided to get the rotors too. :smiley:

OEM ones have 78kkm & are 5 years old.

DS2500 & Brembo rotors will be a good combo.


IMAG0491.jpg

IMAG0490.jpg

2013-02-22164448.jpg
 
Last edited:
2013-02-26165537.jpg

Changed the clutch & the slave cylinder (LUK) and the clutch pedal feels so soft that I thought it was broken. :smiley:
It now releases the clutch from the start and not from the end.

Brembo discs & Ferodo DS2500 - don't know what to say - did only 5km. Haven't bedded them in yet.

However - on Saturday I was playing with the brake servo and the vacuum hose and I think I have found the cause of my poor brake performance in the last 4 years - the seals between the brake servo and the hose weren't good so I have sealed them. It seems that the brakes bite harder now from the start even with old pads/rotors (had them changed yesterday).

Lower ball joints - the old ones with 78kkm were terrible - now the car is transformed - one of the best spent 90€. You can see the travel that they have and the new ones have NONE.

DonjekugleClio197_1.jpg

[YOUTUBE]Y6ReF6ts-lk[/YOUTUBE]

Haven't changed the high beam Osram Night breaker bulbs, will do it today and set the beam.
 
Last edited: