Stainless Brembo Bleed Nipples

[Tarticmonkey]

Folks,

As some may have seen I snapped a bleed nipple in a Brembo calliper over the week. This has now been sorted.

This has lead me to think would something this be a worthwhile upgrade? Or will these still have the same issues?

Front Bleed Screw Kit STAINLESS For Renault Clio RS 197 200 Sport (For Brembo) | eBay

Important - Suitable for vehicles with Brembo 4 piston calipers 4x Front brake caliper bleed nipples / screws - Stainless steel 4x Luxury Bleed nipple rubber caps Kit contents pictured Grade 304 stainless steel for exceptional corrosion resistance Frentech Stainless steel bleed screws are...

www.ebay.co.uk

 

[RSRowe]

You will still get galvanic corrosion, but no more or less than what the originals do.
I imagine the car will be someone else's problem by the time they would start to cause a headache tbh.

 

[Tarticmonkey]

Thought that would be the case as it is still two dissimilar metals there.

Cheers as always.

 

[S24nrc]

After having this happen to mine I usually crack them off every so often to make sure they don't seize up over time. Put some anti seize on there too just to make sure.

 

[Tarticmonkey]

Ta, would shite lithium grease do the job for anti seize. I have used it on my coil overs without issue.

 

[NickD]

Stainless Steel threads can gaul, however, I have never used St Stl in Aluminium so not aware if it will be a problem or not.