I'm looking at a thread in a spanish forum about putting a bigger throttle body in the F4R engine.
They are claiming a big power gain from this, and they change the stock 60 mm one to a 64 mm. The problem with this one is that it enlarges up to 70mm where it meets the plenum, and you have to machine it to get it to fit correctly.
Thay have tried the thottle body in the car and tell that it works fine, it's the same plug and you only have to enlarge a little bit the holes from the throttle body to bolt it to the plenum.
The part number is fron VW and is 078133062B and this cars use that one:
2000 Audi A4 2.8L Quattro V6 30V ATQ
2001 Audi A4 2.8L Quattro V6 30V ATQ
2000 Audi A4 2.8L V6 30V ATQ
2001 Audi A4 2.8L V6 30V ATQ
2003 Audi A4 3.0L Cabrio / Quattro AVK
2004 Audi A4 3.0L Cabrio / Quattro AVK
2002 Audi A4 3.0L Quattro V6 AVK
2003 Audi A4 3.0L Quattro V6 AVK
2004 Audi A4 3.0L Quattro V6 AVK
2005 Audi A4 3.0L Quattro V6 AVK
2002 Audi A4 3.0L V6 AVK
2003 Audi A4 3.0L V6 AVK
2004 Audi A4 3.0L V6 AVK
2000 Audi A6 2.8L Quattro V6 30V ATQ
2001 Audi A6 2.8L Quattro V6 30V ATQ
2000 Audi A6 2.8L V6 30V ATQ
2001 Audi A6 2.8L V6 30V ATQ
2002 Audi A6 3.0L Quattro V6 AVK
2003 Audi A6 3.0L Quattro V6 AVK
2004 Audi A6 3.0L Quattro V6 AVK
2002 Audi A6 3.0L V6 AVK
2003 Audi A6 3.0L V6 AVK
2004 Audi A6 3.0L V6 AVK
It should look like this one: http://cgi.ebay.com/ebaymotors/06-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Has anyone done something similar in their 197? I have to do a lot of research regarding this (I have 100+ pages of technical stuff) and if there's interest I would give you all the information you want, or I can gather.
Cheers
They are claiming a big power gain from this, and they change the stock 60 mm one to a 64 mm. The problem with this one is that it enlarges up to 70mm where it meets the plenum, and you have to machine it to get it to fit correctly.
Thay have tried the thottle body in the car and tell that it works fine, it's the same plug and you only have to enlarge a little bit the holes from the throttle body to bolt it to the plenum.
The part number is fron VW and is 078133062B and this cars use that one:
2000 Audi A4 2.8L Quattro V6 30V ATQ
2001 Audi A4 2.8L Quattro V6 30V ATQ
2000 Audi A4 2.8L V6 30V ATQ
2001 Audi A4 2.8L V6 30V ATQ
2003 Audi A4 3.0L Cabrio / Quattro AVK
2004 Audi A4 3.0L Cabrio / Quattro AVK
2002 Audi A4 3.0L Quattro V6 AVK
2003 Audi A4 3.0L Quattro V6 AVK
2004 Audi A4 3.0L Quattro V6 AVK
2005 Audi A4 3.0L Quattro V6 AVK
2002 Audi A4 3.0L V6 AVK
2003 Audi A4 3.0L V6 AVK
2004 Audi A4 3.0L V6 AVK
2000 Audi A6 2.8L Quattro V6 30V ATQ
2001 Audi A6 2.8L Quattro V6 30V ATQ
2000 Audi A6 2.8L V6 30V ATQ
2001 Audi A6 2.8L V6 30V ATQ
2002 Audi A6 3.0L Quattro V6 AVK
2003 Audi A6 3.0L Quattro V6 AVK
2004 Audi A6 3.0L Quattro V6 AVK
2002 Audi A6 3.0L V6 AVK
2003 Audi A6 3.0L V6 AVK
2004 Audi A6 3.0L V6 AVK
It should look like this one: http://cgi.ebay.com/ebaymotors/06-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Has anyone done something similar in their 197? I have to do a lot of research regarding this (I have 100+ pages of technical stuff) and if there's interest I would give you all the information you want, or I can gather.
Cheers
Last edited: