Recent content by Simon__

  1. S

    Pre-cat

    Just info on how to do it, whether or not I could do it without removing the subframe and manifold ? Thanks for the reply
  2. S

    Pre-cat

    Has anyone removed the contents of their pre-cat ? Thanks
  3. S

    Exhaust information

    The pre-cat reduces emissions at low temperatures and the main cat reduces emissions at higher temperatures. So not much point as the engine gets to normal operating temperature quite quick. I am tempted to tear out the contents of the pre-cat. The contents is very brittle so in time can break...
  4. S

    Exhaust information

    There is only one cat. You can remove the pre-cat or the center silencer. You will more than likely need a remap after removing the pre-cat though.
  5. S

    Another cracked manifold. Powerflex bush now fitted

    You will definitely notice a difference in the engine noise, more so in second gear when accelerating, it's like a tappet noise. Get a mirror and a torch or a camera to get a look at the manifold. If there is a crack you should see a white outline around the crack and then beyond that you will...
  6. S

    Another cracked manifold. Powerflex bush now fitted

    Powerflex bush now fitted. No movement by hand now in the upper torque mount. I just need to clean the engine bay now.
  7. S

    Another cracked manifold. Powerflex bush now fitted

    Powerflex bush http://www.k-tecracing.com/show_product.asp?id=5000 lower stabilising mount http://www.k-tecracing.com/show_product.asp?id=3955&catid=&appid=3&pic=4
  8. S

    Another cracked manifold. Powerflex bush now fitted

    Quick update on the uprated lower stabilising mount. Its a "must buy". The front end feels tighter, the gear change feels smoother and the start up is something else. It feels like your starting up a v12. I must admit though the first time I started it after fitting, was a bit of a shock I...
  9. S

    Another cracked manifold. Powerflex bush now fitted

    I will be fitting a new powerflex bush to the upper engine torque mount from ktec also.
  10. S

    Mattie's FF Track Car

    Have you removed the isofix bar ?
  11. S

    Another cracked manifold. Powerflex bush now fitted

    I had the dreaded tappet/blowing noise, couldn't really tell with the power and seemed to be running ok. The only thing I noticed was the mpg had dropped slightly. Looked at the manifold with a mirror and torch to see soot around pipe 4. Quoted £1300-1400 at Renault. Decided to do the work...
  12. S

    Engine Coolant

    Renault coolant is green.
  13. S

    Connect 2

    I thought the switched live comes from the interface board ?
  14. S

    Connect 2

    Absolutely nothing, plugs in fine but that's it. Thanks for the reply.