Latest activity
-
Steve.humberstone replied to the thread Decatted midpipe- plug and play?.If the cat is removed and the oxygen sensor is disconnected it will throw a fault, You can get 'lambda foolers' which will screw into... -
Steve.humberstone replied to the thread 197/200 subframe locating pins.Bit of an update, I have supported the subframe, loosened all bolts that attach it to the chassis, removed the rear 2 bolts, dog bone...
-
-
Taxed, tested and used in the rain over the weekend just gone. -
Taxed, tested and used in the rain over the weekend just gone. -
Taxed, tested and used in the rain over the weekend just gone. -
Chambers_rs replied to the thread Alien Green 200 CUP.Taxed, tested and used in the rain over the weekend just gone. -
-
Hi everyone, Been keeping an eye out for midpipes with only the resonator and no catalytic converter. For what it’s worth, I’ve had... -
Well traditional logic with a standalone is you buy what you local and preferred mapper uses. I'm not sure you'll get recommendations... -
chris_blue replied to the thread Brake disc recommends?.Shame all the pics gone -
Steve.humberstone replied to the thread 197/200 subframe locating pins.It’s both the front and rear - 6 in total, will see if I can shift it this evening
-
VeiRoNv2 replied to the thread 197/200 subframe locating pins.Oh sorry I thought you meant the front solid mounts,so you just have the rear solid mounts, that's strange...
-
Steve.humberstone replied to the thread 197/200 subframe locating pins.Sounds like what I had originally thought, might just drop it down and force it as far back as possible and see what impact this has...
-
-
VeiRoNv2 replied to the thread 197/200 subframe locating pins.Quite difficult to not align the rear bushes,they slot in easily where they are supposed to go,as far as I know that's the only two...
-
S24nrc replied to the thread 197/200 subframe locating pins.The only thing you could do is loosen off the subframe bolts and try and move it around, but if those bushings posted above are located... -
Steve.humberstone replied to the thread 197/200 subframe locating pins.That's what I had thought, however reading into it apparently it's an issue when removing the subframe and it needs aligning with some...
