Latest activity
-
RSRowe replied to the thread Stupid mistake: Have I now got to remove the inlet manifold?.Well you either start it up and hope it passes through without damaging anything, or take it apart to retrieve the errand piece... -
Jjonblue posted the thread Stupid mistake: Have I now got to remove the inlet manifold? in Clio 200 Area.I have broken the MAP sensor and let the broken bit fall into the inlet manifold. I am no mechanic but I am guessing that if I do...
-
-
OOilydan replied to the thread Dead 197 - Electrical Issue….I have 2 generic ones, and the AA also could not get a signal.
-
VeiRoNv2 replied to the thread Dead 197 - Electrical Issue….What reader are you using? Even if immobilized it shouldn't prevent you from reading codes. -
OOilydan replied to the thread Dead 197 - Electrical Issue….Yes, keyless. OBD has power as it powers the reader. The reader does not connect to ECU to read anything so would indicate no power to...
-
Are you sure the obd port is not working? Is it keyless? Put it in first gear,foot on the brake,press start button and obd should... -
Are you sure the obd port is not working? Is it keyless? Put it in first gear,foot on the brake,press start button and obd should...
-
VeiRoNv2 replied to the thread Dead 197 - Electrical Issue….Are you sure the obd port is not working? Is it keyless? Put it in first gear,foot on the brake,press start button and obd should...
-
RSRowe replied to the thread Dead 197 - Electrical Issue….It will still crank with crank sensor failed. Battery needs load testing properly. If that's ok, the battery fuses. If they're ok...
-
I have now sorted out the airbag light. All of the airbags have been removed from the car including the curtain airbags and passenger... -
OOilydan replied to the thread Dead 197 - Electrical Issue….Ignition turns on fine. Dash lights up. It then just doesn’t do anything but spit some ABS, battery, esp, etc faults at me.
-
RSRowe replied to the thread Clio engine - meganne 2rs gearbox.Well the shafts are the same, so you'll possibly be in the same situation again. The gearing will be completely to shit (if you didn't...
-
Alex at AW Motorworks helped us work out how to fit PMS top mounts to Gaz Gold front suspension. PMS sells the top mounts with spacers... -
Jrob197 replied to the thread Clio engine - meganne 2rs gearbox.I don’t think so, I’ve done it and got 1 track day out of it but the cv joint went just before loading the car on the trailer for the... -
RSRowe replied to the thread Clio engine - meganne 2rs gearbox.I know someone who did the opposite if that’s of any use
