Latest activity
-
LiamP replied to the thread Cutting out at high revs..I would try measuring the resistance between the canbus high/low (OBD port has a tail), should be 120ohm, give those repairs a wiggle... -
Hello I thought I would post this in the UK forums as you guys seem to have much more options than we do in Australia. I am after a LHD... -
-
VeiRoNv2 replied to the thread Cutting out at high revs..Do you have the wiring diagram for the plug of the downstream oxygen sensor please? This is what the plug looks like: -
-
VeiRoNv2 replied to the thread Cutting out at high revs..Spark plugs are actually two years old and maybe 5k miles old,inspected and they visually looked okay, I'll change them soon anyway...
-
Can bus works on resistance between the two wires for communication I can't see why that has been done you said the second Lambda was... -
Tturkie172 replied to the thread Cutting out at high revs..I picked up a car that would backfire/pop and refused to go above 4,500 RPM it turned out to be the spark plugs so don't ignore the...
-
VeiRoNv2 replied to the thread Cutting out at high revs..Oh I didn't know the second oxygen sensor could affect fueling,I thought it was only there to monitor if the catalyst is working. Yeah...
-
Can bus works on resistance between the two wires for communication I can't see why that has been done you said the second Lambda was...
-
Tturkie172 replied to the thread Cutting out at high revs..Can bus works on resistance between the two wires for communication I can't see why that has been done you said the second Lambda was...
-
-
VeiRoNv2 replied to the thread Cutting out at high revs..Yes indeed,about 4 wires have had a repair on them, although they all feel solid and can't see any breaks.
-
Tturkie172 replied to the thread Cutting out at high revs..I see the loom has been modified that connection just so happens to be can bus for engine, ABS and Dash
-
-
VeiRoNv2 replied to the thread 200: Meg swap?.Yeah I would agree with just fitting another 197 engine in,much easier and cheaper.
-
RSRowe replied to the thread 200: Meg swap?.Whatever way you look at it, generally speaking, putting a Megane engine in it will cost at least double what it would putting another... -
-
Another trackday done. The morning was spent making sure I had torqued everything correctly between the brakes, suspension bits and...
