200: Scorpion Exhaust Fitment for 200
- Thread starter CM200
- Start date
matt9566
Paid Member
The centre section is missing - you can either get the non-resonated one (louder) or the resonated one, sometimes they pop up on here for sale or you might be able to get one from Scorpion direct.
For reference:
Non-Resonated - You are missing the longer pipe at the top of the photo which joins on to the cat
Resonated - You are missing the pipe with the resonated section at the top of the photo which joins on to the cat
So it would literally just be a case of getting the part which you prefer - check some videos on youtube of the difference between resonated and non-resonated. Then it would just fit straight on
For reference:
Non-Resonated - You are missing the longer pipe at the top of the photo which joins on to the cat
Resonated - You are missing the pipe with the resonated section at the top of the photo which joins on to the cat
So it would literally just be a case of getting the part which you prefer - check some videos on youtube of the difference between resonated and non-resonated. Then it would just fit straight on
Last edited:
CM200
Paid Member
Ah cheers for that! So is it useless in its current state?
Would explain the freebie!
matt9566
Paid Member
It would literally just be a case of getting the centre section which you prefer - check some videos on youtube of the difference between resonated and non-resonated. Then it would just fit straight on - It's still a great freebie and hopefully the centre section isn't too expensive and you'll have got a great exhaust for not very much!
CM200
Paid Member
matt9566
Paid Member
CM200
Paid Member
Thanks a lot for this Pav.
I had a gander and fitted just the back box onto the standard middle silencer (had to pack it out and use a different clamp).
Sounds absolutely fab as is, I haven’t heard another in person so can’t say if it sounds the same as the scorpion with res middle pipe.
So yeah thanks a bunch for that reply! Owe you big time.
CM200
Paid Member
Now you gotta send it and delete that res haha!
Don’t tempt me! It’s already on my temptation list
Pav
Moderator
Don’t tempt me! It’s already on my temptation list
Haha! It would sound sweet though, have you got any videos with just the backbox on?
CM200
Paid Member
Sorry about the late reply, I’ll try and get one up.
I’m pretty happy with it as just the back box, lots of pops and sounds fairly raspy when you open her up. Put 95 Ron in the pops are a bit more subtle, if I put 97/98 in the pops are out in force and just make me grin way to much.
Tbh I think if anyone is after a set up that’s not to ‘chav’ etc I’d recommend this one.
Also no flat spot as of the moment but could this be due to have stock exhaust system up to back box? Not sure.
Definitely going to get non res center pipe and compare though.
I fitted a ktec resonated catback the other day, its a lot louder than i was expecting, and i have a pretty bad flatspot.
CM200
Paid Member
Yeah as I was fitting my scorpion I was debating if would even sound half decent and was actually impressed.
what gear/revs is your flat spot?
I thought the ktec one was good for avoiding flat spots :s ?
around 2.5-2.8k. I find it pretty savage to be honest, really struggles in them revs. Splutters a little too which i wasn't expecting but i've been told its normal!
I'm not too sure if they're good for flat spots or what realy but it's definitely affected mine hahaha. Sound is great though. Just a little louder than i expected
