Rear Caliper carrier bolts

[jimmybeattie]

When removing the rear brakes on my 197 I noticed the Caliper carrier bolts are pretty rounded. Any idea where I can get replacement stuff or what size i should be searching for?
Thanks

 

[turkie172]

You need to confirm which bolts the ones that hold the frame/carrier to the axle or the bolts that hold the brake calliper body to the carrier. Or the slider pins hex 1,2 or 3

 

[jimmybeattie]

Sorry yes I should have been more specific. I am after the ones that hold the carrier to the axle so number 1 in your diagram. Thanks

 

[turkie172]

The price might be out a bit but that's what your looking for 770300714

 

[jimmybeattie]

Aye that’s the one. Thanks very much

 

[fastrs]

Slide pins no2 from picture are not the same.
How to know who is up, and who goes down.
I rebuild my rear calipers, but i not pay attention when I took off.
Sorry for my bad english.