IT Maxogen

[pu11y]

Hi,

Is there a guide on fitting this?

Do I need to remove the battery?

Many thank. Sorry if it's been asked before.

 

[Craig211]

http://www.clio197.net/forum/showthread.php?43742-Is-there-a-guide-to-fitting-a-itg-maxogen
Here's how I fitted mine with some advice and some pics, I've always been thinking about writing one but keep forgetting haha

 

[pu11y]

Legend; I should be able to figure it out from that.

Nice one.

I'll get some pics if someone wants to use them for a guide.

 

[pu11y]

Will I need a radio code if I unplug the battery?

 

[smoggy mark]

Will I need a radio code if I unplug the battery?

I didn't but if you do its on your service book.

 

[pu11y]

Got half way and it started to rain. Had to stick the old box back in to get home. Needed the radio code, but I need to put the radio monitor back in I think, as I have the sprint gauge in its place.

 

[pu11y]

Can anyone explain the below further please?

 

[Craig211]

Can anyone explain the below further please? View attachment 10542

If it's te solenoid your on about then just leave the electrical connector connected and remove all hoses and the acoustic valve, the maxogen should've came with a plug to cover the pipe coming out of the throttle

 

[pu11y]

Cheers, it didn't come with one but I'll figure something out.

 

[smoggy mark]

Can anyone explain the below further please? View attachment 10542

If you are fitting the maxogen at the back of the standard battery I would just leave this bit in.

 

[pu11y]

If you are fitting the maxogen at the back of the standard battery I would just leave this bit in.

Cheers. What did people use to cut the duckling? I mangled one end with a blunt hacksaw

 

[TB Rich]

Cheers. What did people use to cut the duckling? I mangled one end with a blunt hacksaw

cutting a duckling, well just a knife will do the job.
http://www.theselfsufficienthomeacre.com/wp-content/uploads/2013/10/s-duck-5.jpg

 

[smoggy mark]

Cheers. What did people use to cut the duckling? I mangled one end with a blunt hacksaw

https://www.flickr.com/photos/76773023@N07/13450263224/

 

[pu11y]

https://www.flickr.com/photos/76773023@N07/13450263224/

Cheers smoggy.

 

[smoggy mark]

Cheers smoggy.

No prob's mate:thumbup1:

 

[pu11y]

Finally got it fitted...

 

[jordanframcisss]

N

Finally got it fitted...

never seen anyone do it like that before

 

[Craig211]

Identical to mine