Front Powerflex Wishbone Bushes - Experiences & Advice

[luke197]

Hi All,

I'm going to be refreshing all my front steering components before I do my trip to Spain in July.

My lower wishbone joints have a bit of play in them and look a little worn, so I was thinking of changing them while it was all in bits. Has anyone had any experiences with them and how well they work? I was going to fit PFF60-802 and PFF60-801

http://www.powerflex.co.uk/road-series/product-details/Front+Arm+Rear+Bush/11164.html
http://www.powerflex.co.uk/road-series/product-details/Front+Arm+Front+Bush/11172.html

Cheers Luke

 

[chongwong]

Did you go for it in the end? If so, how many hours did it take?

 

[alex_hazard]

What was involved in pulling the wishbones out?


Sent from my iPhone using Tapatalk

 

[R27SG]

Hi all. Planning to refresh my lower arm bushes and anti roll bar bushes with powerflex.

Anyone done it and any review?

Like vibration?

Ease of install?

 

[R27#239]

I've done them all
arb felt no change, but big job to change as its subframe dropped.
Arms are a pain as the steel is seized to the ally wishbones, but ones out the new ones go in with ease.
The caster adjustable ones are very good

 

[DanB720]

I've done them all
arb felt no change, but big job to change as its subframe dropped.
Arms are a pain as the steel is seized to the ally wishbones, but ones out the new ones go in with ease.
The caster adjustable ones are very good

How is the ride after this setup? Vibrations increase? Im thinking of changing the ARB ones and Rear Wishbone one.

 

[pdd144c]

They work great, but since fitted mine always come loose bolt wise. Need to find a way to stop it happening!