Clio rs200 airbag pretensioners

[ClioJT]

I have yellow seatbelts and recaros in my rs200, can anybody let me know where the pretensioners are located? Are they in the seatbelt latch bolted to the seat or in the seatbelt reel it’s self behind the interior trims?

Also is I have ‘passanger airbag off’ message on the dash. Is there anyway to switch this if I have recaros?

Thanks in advance

I have DTC9001 drivers lap/strap airbag open circuit
DTC9002 Passanger seat lap belt/seat base circuit
DTC80DF airbag locking switch malfunction
DTC0500 vehicle speed multiplex signal missing

And

B1001 left hand seat submarining/chest airbag circuit

B1002 Right hand seat submarining/chest airbag circuit

B00DF passenger airbag locking status change

B0500 vehicle speed multiplex information missing

These are the codes I have after getting the car running again after a bump. And replacing the airbag ecu. Any help to get the airbag light off would be appreciated.


Sent from my iPhone using Tapatalk

 

[burrellbloke]

The pretensioner is in the reel and not the latch.

Were the Recaros in the car before the bump?

I cannot answer your more technical questions. I am aware that the car has a module to tell it if it has been in a collision and if the airbags have been deployed. You will probably need to connect the car up to CLIP to see if you can rectify any error codes by recoding the airbag ECU if your airbags are present but have not been deployed.

 

[ClioJT]

Yes the car had recaros in as standard.


Sent from my iPhone using Tapatalk