Cant change drivers headlight bulb?!?!

Ive managed to get the cap off but i dont have a clue what im supposed to be pulling out all i can feel is wires, any help lads?
 
Take the black cap off, then you have the metal hinge, you need to unclip that as it keeps the bulb in place (watch out because that thing can come off and then it's a PAIN) then you just pull the bulb out carefully and change it over.
 
Cheers lads paid the membership and the how to makes it look straight forward but still cant seem to pull the power supply thing off, what a pain in the arse, on the verge of taking it to halfords for them to do it
 
Cheers lads paid the membership and the how to makes it look straight forward but still cant seem to pull the power supply thing off, what a pain in the arse, on the verge of taking it to halfords for them to do it

the multi plug can be quite hard to pull off the bulb!!!
 
Is it being held by anything else can you feel? It's honestly just a sharp tug on it away from the housing unit and it should come off pretty simply bud.

Is not yeah get yourself down to there and watch them struggle.. hehe.
 
Cheers lads paid the membership and the how to makes it look straight forward but still cant seem to pull the power supply thing off, what a pain in the arse, on the verge of taking it to halfords for them to do it

The power supply can be very tight and due to the restricted access you have it makes it even harder to get off. Try rocking it side to side while pulling and it will come off. Might take a bit of time but it will come off.

It's a hinge that you have to undo so as for the bulb to be released. have you done that yet?

On the normal reflectors on the 200 the hinge clip isn't there. It's only on the 197 and on projectors on both.
 
Last edited: