Are they goosed?!?!

Anyone reckon these need replacing. Got a knocking on front left that no-one can seem to figure out.. just wondering if these are the culprit??
 

Attachments

  • 1D88A89D-C3FA-4A62-AE58-DF90B5CEE5E7.jpeg
    1D88A89D-C3FA-4A62-AE58-DF90B5CEE5E7.jpeg
    2.4 MB · Views: 34
  • EF2B7303-6FE6-4217-BEA8-6DF518FD5BD4.jpeg
    EF2B7303-6FE6-4217-BEA8-6DF518FD5BD4.jpeg
    1.4 MB · Views: 35
Yea replace both sides that will cause a knock even a hairline crack in the rubber will allow the metal cup inside the rubber to hit the metal outer ring that holds it in. Both sides have done the same work so better to replace both sides at the same time. I bought an SKF kit with both cups and bearings for the older larger mounts that yours seem to be.
upload_2018-7-14_18-39-11.png
upload_2018-7-14_18-39-54.png
 
  • Like
Reactions: Doogle
Thanks for the reply. Will get them done next week. How much did you pay for them and where from if you dont mind me asking?
 
It was around £60 for the kit at the time SKF VKDA 35631 T Suspension kit but make sure they are the right type of mount there are 2 types I think Renault changed to a smaller type one around Oct 2010. I think they are £48 each at our official parts supplier Renault parts Direct which I would always support but sometimes the Renault parts are too expensive but RPD is always cheaper than my Local Renault Dealers even with the postage inc.
 
  • Like
Reactions: LOCKE
You would be better clean the scuttle drains while your there in the how to section to stop water build up and damage the electrics like wiper motor etc. as the water level increases as the drains block and the water cant get away.