Search results

  1. Ianboom

    Lower swivel joints, best place to buy them

    The wife's car had an MOT advisory for a worn bottom swivel joint. At the weekend it started making a sqeaking sound (so much for fixing it in the warmer weather!), so needs replacing. I checked the other side of the car and this seems worse than the worn one mentioned in the MOT. Where's the...
  2. Ianboom

    Good car garage warwickshire area

    Lowered the subframe, removed the manifold and welded it. Not a permanent fix, but was fine for the 12 months until we sold Sean the car!!
  3. Ianboom

    Good car garage warwickshire area

    Sean Edwards here too. Did the cracked manifold on my lads 200.
  4. Ianboom

    front shock removal question

    While you have the leaf screen of and scuttle exposed, it's worth checking that the drains are clear. If they block, the scuttle fills with water, causes your wiper mechanism to corrode and seize and if water gets in the heater opening, it can soak the pollen filter and cause the motor resistor...
  5. Ianboom

    front shock removal question

    Or, put thick rubber around the shaft, it will grip better than cloth. Think I slackened the nut whilst it was still in the car. Air gun or similar may help if you can borrow one.
  6. Ianboom

    Air con condenser

    I fitted a nissens condenser to my 197, had no issues. Got it gassed by Kwik fit for £50 as they're easy to go back to if there's any issues.
  7. Ianboom

    Interior door release not working - any suggestions please?

    The lock assy isn't the most reliable. If you do order one, make sure it's for a 3 door not a 5 door
  8. Ianboom

    Cambelt/Aux Belt: DIY or Garage?

    I did my 197 with the genuine tools. The depahser didn't need replacing and the crank pulley was keyed. I checked the timing before I stripped the car and it was bang on (Fred did it originally). I fitted the new belt and tensioner without moving the timing, and it was still bang on. I checked...
  9. Ianboom

    Could a mod mark my for sale thread as sold please?

    As above, my car is sold and I can't change the title. Could a mod please change it? Thanks https://clio197.net/threads/albi-blue-197-2008-%C2%A33250.63206/
  10. Ianboom

    Rough clio with strange mot

    Just ordered a spring for the wife's 42k mile 10 plate RS200, the other side failed last year, but the previous owner only replaced one side. Worth stripping and regreasing the wiper mechanism if the scuttle was full of water, as these sit in it and rust. Also may be worth replacing the pollen...
  11. Ianboom

    197/200 water pump

    FYI Coolant pump bolts require NO silicone or thread lock. Tightening torque is 17nm Ian
  12. Ianboom

    What size is this bolt?

    I kept the bolts for the engine mounts together, so I'm pretty certain it's the correct one as I couldn't see a shorter bolt. I also looked at the parts list and it didn't help either! I'm pretty sure it's the correct bolt, but I don't understand why they fitted a 70mm bolts when it could have...
  13. Ianboom

    What size is this bolt?

    Anybody have 5 mins they could pull their bolt out and measure it? The bolt I have is M10 x 70, the wife's 200 is M10 x 50 but I remember Mick saying the bolt was missing when he did the cambelt and he found one to fit. I put a bore scope down the hole and the 70mm bolt won't hit anything I can...
  14. Ianboom

    Door handle button removal?

    I used some plastic trim tools to split the handle plastics apart. The switches are available for about £2 from Poland, I just bought 6 as the majority of the cost is postage.
  15. Ianboom

    Drivers exterior door handle lock button not working

    I had this on the wife's 200 and bought the replacement Renault switches. It was a fiddle taking the door cards and handles off, but I took it to work and swapped the switch over, using some 2 part rubber to seal the switch back in. The switch now works like new. I've just bought our 197 back...
  16. Ianboom

    Anyone else’s clio falling apart?

    I've just bought my wife's old 197 back from a neighbour after 3 1/2 years. Having just done the cam belt on my 182 and thinking there's another few thousand miles left in the car (currently on 137k), I was horrified to see the corrosion on the front subframe and front suspension of the 197...
  17. Ianboom

    What size is this bolt?

    Long story, but changed my cambelt and reckon the bolt for the engine mount I have for it is too long! Can anybody tell me the size so I can compare please? Thanks.
  18. Ianboom

    197/200 water pump

    Changing the cam belt on my 197. Taken the water pump off and it looks like there was a little silicon on the threads of 2 bolts. Is this a precautionary measure? Any idea what the torque figure is? Main online manual covers sod all on the 2.0 engine. Thanks
  19. Ianboom

    Tailgate diamond locking button rubber melted

    I'm sure I've read about this somewhere! Has anybody replaced the rubber in the Diamond on the tailgate? Ours looks like it has melted! This is the button that locks the car. Ian.