Search results

Akra should be fine, I run a 2.5" system with sports cat, centre silencer box and two other boxes and I'm at 393bhp. My friends Luke's fiesta runs 521+bhp with a 2.5" system again with two silencer boxes a 3" system would be beneficial no doubt, but if you upgrade to a large turbo and have...

No need to change that rubber

71754569 Best Regards Andy

The gizmo can run several different boost levels, but needs to be triggered via button/switch, but it is cheap. I run an apexi Me

I run gate pressure in first, then 0.8/0.9Bar second, 1.2Bar 3rd, 1.3Bar 4th upwards. Its all done via boost controller, ktec were pretty interested when I mentioned it haha. -Andy

You wanna run boost per gear, like my car

+1 for 930Tech

My flywheel is one of their's

I will have a standard 200 renault sport one for sale in the next week or so.. Its like new in grey leather Andy

The ktec intercooler will need to be modified to fit a clio.. As will any Megane 225/230 specific intercooler. Check your hardpipe kit for any cracks on the welds (had this on mine).. Best Regards Andy

Yeah doesn't look all that difficult: Press one out, some machining, hole drilled and refit (heat and freeze)

Its a Helix Cover and Cerametallic Plate with Ktec Flywheel

Pretty good, shift is nice, smooth and quite precise, the throw is quite long though.. Still pulls very well and doesn't feel like its to tall in terms of gear ratios even off boost. -Andy

Just picked the clio back up from JKM Performance.. Now has R26 gearbox, plus billet flywheel and paddle clutch. Flywheel is the KTec lightweight item, as the one purchased from Helix was manufactured incorrectly (see below) -still waiting for Helix/KTec to sort as have asked for labour to be...

Cheers mate

Is that the R26R or the normal R26? cheers -Andy

Just trying to gather some info.. Out of the cars running the meg box, can you tell me which flywheel, clutch you are running and your torque figures? Would be grateful tah

So finally got the R26 box, Helix Flywheel, Cover and Plate fitted, etc Spent a few hours trying to work out why the car would not idle properly did a few gentle pulls and felt like ****.. Called Paul at RS Tuning and explained had a helix flywheel.. Was advised not to start the car as Helix...

Probably more than likely

Bit tricky, yeah including labour that I had to pay for, but I did most of the work myself.. ie mapping and welding, plus a few odds and sods..