Search results

Where did you secure the two points of the crutch strap to? Did you add two more eyelets to the floor?

What are people’s views on harnesses, 5 or 6 point? We have got a four point TRS harness that has a fifth buckle hole that is not used at the moment. Our Corbeau bucket seats have space for a crutch strap. We could get a single crutch strap like this...

The parts have arrived for the oil pressure sensor and oil temperature sensor installation. One sandwich plate, a CANchecked oil pressure sensor and a CANchecked temperature sensor. @EthanMenace has also acquired a custom made HEL line to plumb in the pressure sensor and attach it on a...

Yes, the springs were compressed with a set of spring compressors that we cut down to fit up closer to the top mount. A large pry bar also helped.

The front suspension on my car has been changed both ways. The first by leaving the driveshaft in place and taking the front damper out of the hub. The second by taking the driveshaft out of the hub and taking the front damper and the hub off of the car at the same time. It was easier to take...

On the subject of EnduroKa do you need a ARDS licence?

Don't worry Jimmy has deep pockets.

Have you put the side skirts on yet?

I am looking forward to seeing the non-Clio out on track.

It’s nearly the end of the year and it has been quite eventful for the Clio. This year has been good fun with the usual smattering of track days, upgrades, and generally getting over the crash that meant the car had to be reshelled. Cadwell Park was a great track, Thurxton was a bit meh, Brands...

I was a bit quick with the ordering. We have now ordered a Susa plate without the oil cooler feeder feeds. @EthanMenace has been speaking to @LiamP and is going to get a custom made line from HEL with the pressure sensor attached on a pigtail.

That is the heat shield.

Thanks Craig. I have ordered a Mocal sandwich plate now together with an oil pressure, and oil temperature sensor, to wire in the CANchecked unit.

Can anyone recommend a sandwich plate that I can connect an oil pressure sensor and oil temperature sensor to?

We have finally got the CANchecked MFD32 installed and working. This has taken quite a bit of time and effort to get this far. The device was delivered without an ODB2 cable in the box despite it being advertised as coming with the cable. I got the device from www.turbozentrum.co.uk and they...

I love the aggressive nature of the Gripper in my car. It was fine to drive on the road but just sounded odd and clunky with a plated diff when parking in a busy car park. These Clios really should have come with a diff as an optional extra as it gives them so much more grip in and out of corners.

If your car is a fast road car get a Blackline as they are very similar to a Quaife but cheaper. If you use your Clio on track, and mostly on track, then consider a plated diff like a Gripper.

I have booked on for Saturday 17th February 2023 at Snetterton with MSV.

@Big Ben How about Snetterton with Javelin on Sunday 4th February 2024?

Are you talking about the rear beam bushes? I don't think you will really notice a difference with the bushes in the rear beam. I have spherical bearings in my rear beam and I have not noticed a great deal of difference over the purple PowerFlex bushes we had in there before.