Search results

Sorry my mistake kind of a trick question I have just seen they are both green

Yea I know it had to repair the plastic line from fuel pump to the front hard line. So which hard line is it the green or the black one?

What car and what exhaust are you running that bracket is bolted to the diffuser bracket mounts at the top as it bolts to the under floor studs are you using a single exit exhaust?

That is the 197 brackets the part that bolts through the chassis that mounts the bracket through a square rib under the chassis (middle of the picture) is the bit thats not looking right to you the single spikes pointing left and right are the bracket itself.

Well I clicked on it and it works, but what I have found my account is registered with a Northern Ireland address and if I search eBay for stuff anyone that does not post to Northern Ireland their listings do not show up in the search and I have to search in a InPrivate browser window so no...

Where are you UK ireland ?

Here is a temperature reading thread the second page has a picture with the exact temperatures from the diagnostics info marked on the picture hope it helps someone. I have noticed that on some cars that I have fixed the oil cooler when the oil filter has been over tightened it turns the oil...

There is a pair for sale on ebay Exhaust Bracket link

Did the handle ever work for you because I was thinking by chance could the door have been swapped for a cup door that would not have the infrared sensor I have a door handle here I took the whole thing from a door and can give you the sensor number it should be the same as a mk2 scenic system...

Any update how is it all going now with the handle

That picture is a more normal Clio and there are different UPC types check the part numbers on the two. The guy above had the relays put in the wrong places and damaged the UPC the UPC is vin numbered to the car not sure if it has an effect

OK if the button on the handle locks the car then the wireless receiver inside the handle is working and the handles button is working that only leaves the infrared sensor I'm finding it hard to find out the key points like is the sliver dot still on the handle tell you what, look at this video...

Will the push button on the handle lock the door that will prove the wireless sensor is working and the infrared sensor is not. There should be a silver circle on the inside of the handle is it sill there?.

A link to a thread might help but you need to work out what the problem is if it's the keycard, the handle button or the handles radio sensor or the infrared rectangular square fitted in the door panel behind the handle. THREAD LINK BELOW Door Handle Thread Test Logic: 1. If the keycard works...

Ready made kits are available no one makes there own

Another Video

This is the area you should be looking at 1337 Power switching unit 756 AIR BAG/PRETENSIONER COMPUTER 419 AIR CONDITIONING CONTROL UNIT 1232 ELECTRIC POWER ASSISTED STEERING SYSTEM 645 PASSENGER COMPARTMENT COMPUTER 653 CLOCK/EXTERNAL TEMPERATURE/CARPHONE DISPLAY ASSEMBLY 1714...

I know you checked voltage on the can bus which should be 2.4V and the other 2.5V you were getting higher than that so it is how the modules in the car are talking to each other and more likely the wiring. You also need to check the resistance the can bus system has two 120 Ohm resistors in it...

That would be good sure let me know I'll show up