Search results

Track day #2 complete I don't think I would want the full set of Powerflex engine/gearbox mounts in a road car, lots of vibrations and making the few remaining bits of trim rattle about. Can't say I have noticed much difference from them (in the way the car drives) but I fitted them as a...

No road miles, no MOT or tax etc so it's track use only I have started it up and it seemed a bit vibratey, but that may be subjective as I have read others posts about new engine mounts causing vibration and then settling down, so my opinion may be affected by that. It's also still up on stands...

All the engine and gearbox mounts now done. Just need to refit the undertray, front wheels and a check of the rear brakes and good to go. I have booked the Combe track day on August 8th, anyone from here going?

There isn't an extinguisher, stickers were added by a previous owner. Unwise IMHO as could cause a marshal not to bring his if you pulled up nearby on fire. I have got a plumbed in one from an abandoned project that's no good for motorsport any more (not been serviced and unsupported by the...

Minor update Bought a full set of Powerflex engine and gearbox bushes Changed the lower engine mount whilst doing the gearbox oil Fitted up the torque arm bush loosely for now, whilst I change the upper engine mount but its just too hot in the garage today 2 done, 2 left to do. Toying with...

I fixed it to the chassis rail using M6 rivnuts and stainess dome head bolts. I bought some 10mm aluminium rod with a 6mm hole bored through it from ebay to act as spacers for the rear edge supports. Cut it to length, again using M6 rivnuts and stainless dome head bolts and put penny washers...

could I have editing rights please?

No, the trader that I bought it from was though

You did

Thanks What I didn't get as far as posting was the spec now Pretty much all interior removed Sort of cage thing (have I seen it referred to as an 'Oulton Park' cage after some school cars there?) Sparco seat and TRS 6 point harness (I fitted the harness) Ds2500 pads and R888R tyres H&R...

I have already introduced my car to the Forum but thought I would do a progress thread as well. Bought my Clio late last year solely for trackday use. There won't be massively dramatic mods as the car was already prepped and most of what I will do to it will be tidying things up a bit rather...

Hi All Been lurking for a bit, finally used my Clio so time to post. I bought the car at the end of last year for track day use, it's taken a bit of work to get it ready to use (I think it had been stood up for a while) inc Cam belt etc and a good run through brakes, oil change etc. Finally...