Sean197's latest activity
-
I've no real opinion about the standard suspensions except that they're all high like a bus. I've driven 200 Cup dampers with H&R... -
My Clio is only really used on track now and it is stiff and unpleasant to drive on B roads. It is perfect for how I want it to drive on...
-
Sean197 replied to the thread Shock absorbers - What to buy?.It isn't. I've had both, and far preferred the standard 197 suspension as I found it far more compliant and predictable on 'normal'...
-
KYB are genuine shock manufacturers and top mounts, but low production volumes and contracts might prevent them from selling...
-
Now for the winter In 2 minds what to do I have a set of Sabelt buckets to go in and would fit a cage at the same etc However I am...
-
Finally got round to getting a geo setup done Taken the 20mm spacers off and fitted a set of 8j Speedlines Must admit it's like a new...
-
@Chambers_rs drop me a message on here or on Instagram @duct3d if you need any help with your battery kit.
-
Final bits today. All the trims put in and lower trims cut for the cage, could do with a bit more fettling but it is good as it is...
-
Sean197 replied to the thread Clio 197 front spring dimensions.You don't need dimensions, all you need to know is if your car is a cup version or non-cup. Always change springs in pairs too. Try Ebay...
-
The tyres are on ready for a wet day at Donington Park. Four brand new tyres and fitting costing a little bit less than my usual...
-
I found a good way to refill the gearbox oil is gravity feed trough the reverse/neutral switch with the car on the ground,leave the...
-
Sean197 replied to the thread Fitting a turbo engine - Clio 197.It'll be as reliable as the map. If the map is shite then it doesn't matter how 'built' the engine is. You have a turbo manifold...
-
Sean197 replied to the thread Fitting a turbo engine - Clio 197.Turbo from a megane 250/265 will run 310bhp, using a megane 225 ecu with a map is the cheapest option.
