Onrus's latest activity
-
Amd while she was outside sunbathing Got the iron x done So at least I can start the deep clean on the paintwork -
Engine bay needs a good clean up Bulkhead connections need to be fitted rather than holes Re-do the heat shield
-
Waiting for some new bolts so I can get the engine on the stand Plan is: Steam and clean Paint - to decide on colours - probably...
-
The engine has been removed. The shafts came out smoothly without any issues, and every nut and bolt appeared to be fairly new...
-
The old RB
-
Keep finding nice bits to have on the car as we go along. Next is to get these dropped out and get the springs sent away for powder...
-
Engine is coming out tomorrow so grab a quick hour before the kids came home from school. New calipers, disks & pads I had this...
-
Just learn to heel and toe, ain't that hard. Auto blipper FFS :poke: :tearsofjoy:
-
The gearbox has been opened. There was a smell of burnt oil as if the gearbox had got very hot. This explanation was sent about the...
-
I think that I have solved the oil pressure issue now. I spoke to CANchecked who make the digital display that we use. I double checked...
-
Onrus reacted to littleg78's post in the thread I don't know where this is going to end up... with
Like.
Clio went to a new home last November, and I picked up this MX5 in December. Very different beast to the Meglio, and really enjoying so... -
You know what the solution is right? Stop monitoring it :tearsofjoy:
-
Onrus replied to the thread Glacier White 200 Cup.I’ve spoken with a cup race car owner and his oil pressure is 4.5bar on track when warm. I have been told the oil pressure is all over...
-
@EthanMenace removed the gearbox this afternoon. It really helps owning a Fench car to keep costs down by being able to do a lot of...
-
Onrus replied to the thread Top Mount for Blistein B14.I’ve got PureMotorsport top mounts with b14’s. Very good quality. I daily and track my clio.