Poly bushes

Just got a 197 and wondered what poly bushes are worth doing straight away , thanks

Sent from my SM-N950F using Tapatalk
 
I bought powerflex engine mount inserts for the upper torque arm and the lower dog mount. Good combo i think, the vibrations aren't bad. Only noticed them at idle/start-up and junctions for like a week
 
  • Like
Reactions: Nedla
Yep, agree with above, torque arm, dogbone and I went with gearbox. All makes it more precise and the vibrations die down after awhile. After that you have rear arm bushs, front wishbone bushs and ARB bushs, most leave standard.
 
Yep, agree with above, torque arm, dogbone and I went with gearbox. All makes it more precise and the vibrations die down after awhile. After that you have rear arm bushs, front wishbone bushs and ARB bushs, most leave standard.
I'm tempted by doing the gearbox mount, having already done the torque arm and dog bone. Does the gearbox one make much difference?
 
I had the torque mount done first then the gearbox and dogbone mount added on so its hard to see which has made the difference.
 
Cheers guys! [emoji106][emoji41] Will probably get it done. I just wasn't sure about leaving the upper (on the right) OEM by itself. Don't want really bad vibrations from it though as it's my daily [emoji23]

Sent from my ONEPLUS A5010 using Tapatalk
 
  • Like
Reactions: Pav
I have the part numbers for the top 2 bushes what the other one I need please,

Sent from my SM-N950F using Tapatalk
 

Similar Thread Suggestions