Anyone else get RR'ed at FCS?

Hi guys, like above I got dyno'ed at FCS with my scorpion non res fitted and ended up running 190bhp. At the minute it has a k&n 57i on (came with the car 5 months ago when I bought it) so looking to replace with an ITG Maxogen. Also getting a 200 Cell sport cat fitted next week. Should I be looking around the 200bhp mark with all this done? Bearing in mind the fan on the RR at FCS was practically a house fan, it was 30 degrees outside tempurature also. Apparently the dyno was pretty accurate as a nearly brand new 133 went on before me and got 133 on the dot.

Cheers :smile:
 
(Thinking about it, kind of a weird post not sure if it should be in here or not! Feel free to move if I have post in the wrong section)
 
I wouldn't expect to much more, remap after and you should hit near 200. id go to a standing rolling road with full facilities for a more accurate figure.
 
I wouldn't take too much notice on the figure you got, the Twingo Rally car that got dynoed only put out 160 and they said it had a crap map... It's mapped by Renaultsport an putting out 190.
 
the most you will gain will be from removing the crap induction kit. as that probably lost you a few bhp
 
You should have took the car over to the CS area, the guys over there give out very accurate and free bhp appraisals.
 
I wouldn't take too much notice on the figure you got, the Twingo Rally car that got dynoed only put out 160 and they said it had a crap map... It's mapped by Renaultsport an putting out 190.

This doesnt make any sense as by that logic I would be running 220?

I am getting rid of the k&n 57i this week for an ITG and also a 200cell sports cat, will get RR'ed again and see what the effect is.
 
Cool best way mate :thumbsup:

Yeah definitely! at least if the rollers are out then it shows on both runs ha! unless they are massively out and it looks like I'm down on power! To be honest I'm not actually too fussed with what I'm running, more interested in seeing if there is an increase in power with the mods I'm buying!
 
Chris 182 (the one that blew its charger at the show) went on and made under the power it should have. Think there were a few compaints that the rollers where out before the rollers finally gave out.
 
If they are down on power then surely I'm up? I'm not complaining! Mine was the scorpion stand clio if anyone saw/heard it running