Latest activity
-
Hhwa0725 reacted to RSRowe's post in the thread Check Emissions, Check Injection & P0010 on Clio 197 with
Like.
^ correct Second sensor just checks for the efficiency of the cat. -
Hhwa0725 replied to the thread Check Emissions, Check Injection & P0010 on Clio 197.Thanks guys, Could a flat signal mean something is wrong with my cat, causing the emission test to fail? On my emission test report...
-
BBluetex replied to the thread Scrubbing Noise from Engine bay.Solved it, the PCV Valve caused this. After cleaning the noise is gone for the last 300 miles, didn´t even sound like the typical PCV...
-
Not much to report But went for a longer drive this evening after getting back from holiday Did 25 miles on that private farm road... -
RSRowe replied to the thread Lateral sensors, configuration.Lateral sensors are in the B pillar (95% certain). Definitely nothing to do with the seats. You should be able to find where the... -
RSRowe replied to the thread Check Emissions, Check Injection & P0010 on Clio 197.^ correct Second sensor just checks for the efficiency of the cat.
-
Got the dash out to lighten it a bit and do some work,removed the passenger airbag and with the help of some speed holes got it down to... -
SHi all, Onto the next issue with the rebuild. Airbag light on the dash - stopping me going for MOT currently I have 2 faults Driver...
-
-
Mardgee replied to the thread Seat removal question.Just done this myself last week. Airbag fault is self healing if you like so can do as you wish :) -
Kanazir replied to the thread Check Emissions, Check Injection & P0010 on Clio 197.As far as I know o2 sensor after cat has nothing to do with fuel to air ratio that is a job of first o2 sensor so even if second one... -
Hhwa0725 replied to the thread Check Emissions, Check Injection & P0010 on Clio 197.Hi all, My car just failed the emission test on high idle (2.6k ish), the car still has P0010 error with check injection and emission...
-
-
Will disappear when the seat is back in -
so i ended up fixing this by taking a chance and replacing just the voltage regulator, in situ, which was a bit of a pain to do as i am... -
Phenom replied to the thread Seat removal question.Will disappear when the seat is back in -
Thanks for the fast reply! Will it disappear after I plug back in the seat or will I need a diagnostics tool to clear?
