mot tomorrow

[Foxspeed]

well take the old girl in for her mot tomorrow :thumbup:

month early before the tax is due but should be ok

 

[Roy]

all the best mate
hope all goes well

 

[chappo]

hope it goes ok mate.

 

[mcphee200]

It'll be reight!

Knocking on now mate!

 

[Foxspeed]

its an expensive part of the year - insurance, mot, tax and service :crying:

having the mot done "in-house" and going to do the service myself and
stamp the book

i may consider taxing for 6month and then when due again do it for 12 so its not all due at the same time again :001_unsure:

 

[jase]

It will be fine Si.

Mine was done in July and only failed on illegal plates.

 

[Giles]

good luck mate!

 

[Wayne]

Hope she goes through ok,i'll be thinking of her mate.

 

[Foxspeed]

ooops failed :thumbdown:

emissions :confused1:

 

[chappo]

ooops failed :thumbdown:

emissions :confused1:

i take it you have an after market exhaust mate. hmy:

surley it cant fail on a standard zorst can it ?

 

[Foxspeed]

co - pass 0.001%
hc - pass 7ppm
lamda - 0.97-1.03 and it came in at 1.05 :crying:

going to go back monday and have a play - got an idea what the issue is

 

[RS197]

co - pass 0.001%
hc - pass 7ppm
lamda - 0.97-1.03 and it came in at 1.05 :crying:

going to go back monday and have a play - got an idea what the issue is

What exhaust set up you running?

 

[jase]

:huh:thats strange seeing as mine passed with decat...

 

[Foxspeed]

its the k-tec (magnex) exhaust with itg panel filter :001_smile:

 

[rg197r27]

sorry it didnt pass si what do you think the problem is

rich

 

[Wayne]

thats a bummer mate hope its not to bad.

 

[Giles]

sorry to hear that, hope you get sorted

 

[Foxspeed]

well according to the results it caused by an exhaust leak after the cat - so will need to go round with a bit of exhaust putty round the joints

as co and hc are low and lambda is high the leak is causing the emissions tester to pick up the worng readings :cursing:

 

[Wayne]

thats a result mate,nothing to bad.

 

[Foxspeed]

i can hear a slight exhaust blow when cold and if i have it in the garage at home i can still hear a slight blow - so ealy to work monday and will have a scoot round with the exhaust joint sealer and then hopefully will pass :001_unsure: