Help Needed - Brakes

[MarcB]

Looking to see if someone can point me with the correct items that I need.
Im going to be fitting a 6 line braided brake hose kit that was bought from @R27WTF AKA Supreme Motorsport.

Im also looking to replace all the plastic clips that keep the hoses in place along the rear beam and any other places.
I do have a few clips already which I know are correct and needed but unsure of any others.

Can anyone point out from this picture what I would need or even better have a picture of there own rear beam.

 

[R27WTF]

No2 you need but we remove them and cable tie through the 2 slots on the back side of the beam


Sent from my iPhone using Tapatalk

 

[MarcB]

No2 you need but we remove them and cable tie through the 2 slots on the back side of the beam

@R27WTF Does your hose kit fit securely in to the plastic clips ok ?

 

[R27WTF]

@R27WTF Does your hose kit fit securely in to the plastic clips ok ?

Yes they do but they are a little tight. They will go in fine.


Sent from my iPhone using Tapatalk

 

[MarcB]

Is there anything else I need clip wise from the picture above ?

 

[R27WTF]

It will depend on what the condition of your clips really


Sent from my iPhone using Tapatalk

 

[suj]

Regarding front, you can pry the OEM bracket off the standard brake line and use the hose clips including in the Supreme Motorsport brake lines like I did

Suj's Nimbus Clio 197 and E36 328i Trackcar

Suraj... speak with Matt (@R27WTF) he’s been making braided hoses in-house now so I’m sure he could sort something out

clio197.net

 

[MarcB]

So I have bought the following in Red for doing the fronts but its more the rears I'm looking at