Search results

  1. A

    Guide to remove front wishbones?

    Just wonder if anyone has removed their lower control arms before? I need to get them out to fit a set of PF camber bushes and would love a bit of guide as to the easiest way to go about it. Do I have to drop the subframe, or can this be avoided? Any help would be greatly appreciated! Thanks...
  2. A

    Help with fitting a fixed back bucket seat?

    Hello, I have been given an older fixed-back racing seat made by an Australian company named Velo. I'm trying to find an easy(ish) way to mount it, that will allow me to relatively easily swap between my stock recaro and the fixed seat for track use. The seat uses side mounts from what I can...
  3. A

    Modified Akrapovic, who's done it?

    Considering a res delete on the Akra just to give it a bit more edge. Has anyone done anything like this? Probably won't change out the manifold for now as it's such a big job... Such a shame the cat is in the manifold. Show me what you've got! Sent from my iPhone using Tapatalk
  4. A

    AST adjustable top mounts for RS200?

    Does anyone know if AST make a adjustable top mount for late model 200's with the 83mm spring as opposed to the 90mm one in 197's? I have sent them an email but haven't got a reply as of yet. They make mounts for a Meg 2 but not sure which size spring they use. They also make them for a 197 so...
  5. A

    Compbrake adjustable top mounts. Who has used them?

    Hello, Just wondering if many of you have used Compbrake fully adjustable top mounts? The one's in question are the ones linked below. I'm in Australia and about to pull the trigger on some top mounts but just wanted to see who had used them before. I have heard good things but always good to...
  6. A

    Routing a cold air stream to the intake/TB? Pls help!

    Hello, I am trying to find the most effective way to get a proper cold air feed to my green cotton induction kit. It is an aluminium enclosed cone with a 62mm opening to feed cold air into it, however I am yet to find a way to route a proper feed without relocating the battery. I have been...
  7. A

    Pagid RS29's

    Anyone running a set of Pagid RS29 pads? If so, how have you found them? Will be doing 8 - 10 track days and fast road but have found them super cheap and am pretty tempted. Only thing I'm worried about is the brake squeal on the road. Anyone able to help here? I think these will be a fair step...
  8. A

    Which rotors with DS2500's?

    What rotors are people running or recommending for use with DS2500's or equivalent pads? I am doing about 8-10 track sprints a year and a fair bit of fast road driving. Still gets used for city commuting so can't be too full on. Would ideally like something with slots/dimples as I do prefer...
  9. A

    Clip in harness points

    Hello, Yes another harness thread but a bit different. I have a Sabelt 4 point clip in harness and am just wondering if there's any way I can mount the lap belts without drilling eye-bolts into the floor pan? Has anyone done this and do they have any photos? Thanks
  10. A

    Semi slick pressures

    Hey all, First time using a set of semi's on the car, I've picked up a new old stock set of Bridgestone RE55S medium compounds. What kind of cold temps should I be starting with on the track? Should I aim for around 32 hot? Air temp will be around 12 degrees celcius. Keeping in mind I will...
  11. A

    Cheapest Sprint/Elia spoiler

    Hey all, I am looking to get a Ktec Sprint spoiler for my 200 and am wondering where the cheapest place is at the moment? KTEC are charging 190GBP which converts to $380AUS which seems a bit ridiculous for an unpainted spoiler, without shipping... I thought I saw some on ebay a while ago but...