Search results

Well done for sticking with it. So you are still using the wiring bypass at the moment if so what's the next move?

Well look at the water leak link and see how you go

Have you got a sun roof, wind deflectors there was a white Clio on here from Belfast that had a problem the water was coming in through the door I think the wing mirror seal. Found it Water leak (passenger door)

OK so you can communicate with the UPC the vin number CRK8 points to Clio 3 RS late model so it's a Clio RS UPC my parts lookup only goes up to 2011 so at this stage make sure you can with the diagnostic talk to all the computers when the ignition is on that will check they are powered up and...

The UPC will have a vin number I'm not sure about configuring the cars options if it's the BCM or UPC thats programed but get the part number of the UPC and we can work out if it's a Megane one or Clio and I will see if there is a difference between a key or keyless start Clio one. The UPC needs...

Well done keep at it.

Happy for you good job sticking with it

@wr6warren I don't know if nonmembers can open a new thread, but I would do that; it's hard to answer through multiple threads. I'm in Northern Ireland and don't mind helping. Let us know something about the car, what's been done with it, etc., only because someone fixing a crashed/damaged car...

Why not overlay the new splash guard over the broken one or use a section of the new splash guard to bond over the broken section on the old one.

The rattle is the tips hitting metal against metal, Miltek sell tips for the 200 the main exhaust is the same just bolt them on and done as far as the rattle and melting fixed, but a map would be needed for the flat spot your in Scotland I think I'm going to see if I can transfer a custom map...

I've an Akrapovic evo and have used a piper cat back with a Ktec manifold they are both good but the piper has a full ktec map when fitted, the Akrapovic I fitted no mapping and was stronger down low right away no down side in a standard un mapped car. Make sure the exhaust goes all the way into...

What I cant understand is why is there no warning lights coming on for emissions change both they are the same age and if the first one is over fueling the second is not picking that up to bring on a warning light and we know it is over fueling.

Cool so the infrared sensor you had to change on the door handle mount is that right?

Your only going to get at it from underneath I've changed mine in the yard just jack the car up on one side, slide under and change it.

You need a 22mm spanner most lambdas are that size and from underneath it's hard to see and disconnect the Lambda at the same time you might end up lying over the top of the engine to reach down and disconnect the lambda its got anchor plug on a bracket right of the flexis.

There was a section on the site with all the info the last post has the RS components link to the switch Door handle thread

Your driving on the wrong side of the road, but if the car is from your country check the bulbs are fitted correctly it maybe fitted but not sitting just right in the holder the projector headlights have very little room to check you almost have the take the headlight off the car to be...

I think the unpainted ones are available the internals can be swapped over thats one option the other is to replace the switch I did two of them the other night. Now the word on the street is that the Laguna III door handle is the same but normally they are painted the cars colour but again the...