Search results

great, thanks. Are these the ball joints that Rene Dizdar sells upgraded versions of?

Afternoon all, Took the 197 for its MoT the other day and the tester picked up some movement in the front near side wheel. It only seems to be when rocking the top/bottom of the wheel not side to side. He couldn’t see what was moving, the suspension seemed to be fine and stationary. Is this a...

I have the trackcardoorcards all round and they’re great (but yes a little pricy when you add delivery and VAT etc) I was also the Guinea pig for the 3DSX door handle surrounds and would say they make a world of difference. The door handles sticking out with the flat door cards look shite...

I have an Anker Soundcore Boost https://www.amazon.co.uk/dp/B01N4V4X5M/?tag=clio197-21 which has surprisingly good sound quality. My car is completely stripped so I use a couple of command Velcro strips to mount it to the centre tunnel. it has the added benefit of being a power bank so you can...

So it turns out you can swap it without draining the system, and it’s a piece of piss with the bumper off.

Has anyone replaced the aircon pressure switch? If so: 1) can it be done without depressurisation of the system? 2) is it as simple as it looks 3) where did you get the replacement switch. Cheers!

If anyone else is interested the answer is here: https://www.facebook.com/groups/1781255685464253/permalink/3063400547249754/ Nic from 3DSX printed some up which I trialed and gave Feedback on. The revised version is great. Nice and sturdy and fits snugly against the handle surround clips so...

It sure if this helps: https://clio197.net/threads/4-x-michelin-ps4%E2%80%99s-%C2%A3280.65516/

Mine has two long cable ties linked together her. Through the hole I. The undertray and around the subframe.

Just drill a small hole for the cable tie.

Does anyone know anywhere other than Carbon-Tec that makes/sells the door handle spacers for a 197 running track door cards? They look like a pretty simple thing for those with a 3D printer but I can’t find anyone selling any.

It was a bit of a chore. Mine was caught up in the cabling. I put a long screwdriver in the hole for a bit of leverage and basically forced it out the bottom while praying I didn’t fuck the radiator! Think I got lucky.

I’ve not tried the DS1.11, but like I said, they’ve been great on the track.

I’ve got PBS Pro Race front and rear and they’ve been great on track and road. Braided hoses and Motul RBF600 brake fluid - no fade

Mines just used on the track so not worried about additional noise. ripped it out, which took a bit of doing as it was caught up on some wires, but other than that it was only held in by the bottom knob! Still that 150g weight saving has got to good for at least .01s a lap of Brands… Cheers lads!

Ah excellent. I could just about make out the word resonator on it! Cheers! as I’m running a KTec induction I assume it’s pointless?

Can anyone identify what the hell this is?! It’s black plastic and reaches from the just above the bottom hose connection of the radiator up to just under the coolant expansion tank. It looks like it should have a large hose on the top end, but there’s nothing on mine. It’s held in very loosely...

Just be careful with the clock spring when when you take the wheel off (try and keep it in one place)

My Invoice only says Mk3 trackday cage but I’m pretty sure it’s the stripped interior version.

For now I’ve just left half the rubber/sponge mat in. I looked at picking up a Carbon Navigators footrest someone on a Fb post was selling but they are all flat bottomed and the annoying supporting beam in the middle of the footwell gets in the way. ive got an SW motorsport heel plate in the...