Search results

Torques on eBay supply them (look for OE Quick Connect adapters), failing that if you wish to get a pre-made line speak to Jade Developments.

Flickr is the answer!

Nice one cheers, any suggestions on where best to source a genuine one in the UK?

Which gauge is that you're using? I may have missed it in the thread. I am looking to get one to monitor oil temps and such.

Some trackday photos:

If you don't already have an exhaust system and want one it may be worth considering a Pure Motorsport manifold and exhaust system, it looks like a work of art.

I picked the colour and got them powdercoated - I like them a lot more than I expected to actually, definitely going to be staying red. The track evening was Monday - really enjoyed it, car performed well. It was only my third trackday and I couldn't be happier. Definitely need to improve my...

Not updated this for a while... a few small bits recently. Lots of pictures below - really really happy with the car. Few small things need doing, going to start to add powerflex mounts etc as they are tired. Flexis on manifold are starting to go, but going to have a think about which way to...

Well - from my experience it did solve the issue so hopefully it's a simple fix like that for you. It's worth having a quick look at the pre-cat and the second cat once you dismantle everything. I think I bought a 63-68mm Mikalor clip - I could probably have gone a size down, as it's very very...

I had this. I thought it was the pre-cat falling apart. I replaced the manifold -> cat clamp, then the cat -> exhaust clamp (scorpion) with a mikalor clip. Done both up with an impact and I've never heard it since. I think the cat -> exhaust clamp was the one that sorted it.

Yeah exactly - on the front it appears front, though the rears will have the issue due to the lip without spacer. I'm planning on countersinking all the wheels I have - I'd not like to be stuck in an emergency :)

I bought the Elite D kit - I got 90 and 82mm. I just did a trial fit, there will indeed need to be a countersink put in the back of the wheels (only the rears) for those not running spacers. I bought them so I can run silverstones on track, and standard wheels + 18mm spacer on the road.

Hey everyone... random question - any idea on a replacement heat shield that isn't the fibre type material? Mine is ripped in the middle and I wondered if a Megane 225 heatshield (metal) or similar would be a direct swap?

Undertray is 4 or 5 10mm bolts. Can be done without jacking the car up too.

Nice! Really like what you've done with this car, taking it to another level! Hope to see it in the flesh at some point

Time for another update. I got the track rods, track rod ends, discs and pads changed in preparation for the MOT tomorrow. I did also replace the clamps on the exhaust. I spent some time tonight sorting out the alignment, running approx 0.8mm toe out on each side for now. Didn't change the bleed...

I took a gamble in the end. Clamp RNP27 is 2mm bigger at 79mm (the standard is supposedly 77mm). However it fits well and overall is a better clamp, in my opinion. It cost me £2.59 from eurocarparts.

That's a cracking deal!!! Sent from my iPhone using Tapatalk

Sandisk do an extreme pro range, I imagine they will be sufficient for your needs. I would consider getting two 64gb over a 128gb just to avoid the all your eggs in one basket problem. Sent from my iPhone using Tapatalk

Hey all... Need to replace my CAT to manifold exhaust clamp. Where's the best place to source the part, and is it best to use the two bolt or single bolt version? I had bought a 69mm two bolt version but it's way too small... I now read it's 77mm (according to the lookup of the Renault part...