Plastics4Performance, perfect Quality!
I have antistatic stickers, you can remove and reattach them as often as you like.
You see the sticker too, on the pic two posts before where the car is on the trailer with the back.
Because my lip literally flew away on the trackday (it didn't hold up quite as well before)
I opted for the Renault Sport Cup lip for C3RS Ph.1, the offset between the sill and the standard lip has always bothered me.
I ordered it from RS Performance, it even came within 2 days.
My car/Suspension was set up last week
Then it went straight to the Bilster Berg and OpenPitlane Trackday on Sunday.
First test passed successfully, only had the problem 3-4 times that a charge air hose blew off, but managed on site that it worked over the track day.
Small update, this week my Lambda controller from Innovatec came with a Bosch LSU 4.9 probe.
So I was finally able to connect all sensors with my CanChecked MFD15 and tie and lay the wiring harness properly.
If the values reach a min / max value set by me, they are displayed in blue (too low)...
Went a little further.
Unfortunately, a lot of waiting time passed because I had to wait for various hoses. (Sometimes C3RS hoses were still used, which had to be exchanged for M2RS)
Adapter plate for oil filter + oil cooler, oil pressure sensor and oil temperature sensor installed and wired...