VeiRoNv2's latest activity
-
When we installed the PMS top mounts we were left with a small problem that the original OEM top mount covers would not fit back over... -
VeiRoNv2 replied to the thread Cutting out at high revs..Just to update this it was the starter motor heatshield causing all the problems. I drove to Wayne at Chipwizards,he spent hours and...
-
Update number 2 - Carried on from previous post... Regrets... If anyone was to ask me what was my biggest regret when putting together...
-
So after I hit this deer at the end of the month of July I had been without my car thank god I have a motorbike so I can still get to...
-
VeiRoNv2 replied to the thread Fast Road/Track Ultra Red 197.Still need to make a plate to direct the air better.
-
VeiRoNv2 replied to the thread Fast Road/Track Ultra Red 197.Few things to update,removed the Scorpion rear silencer and went single exit,lighter and bit louder and much better deeper sound rather...
-
VeiRoNv2 replied to the thread Intermittent Starting Fault.Looks like a fuse popped.
-
VeiRoNv2 replied to the thread Intermittent Starting Fault.Do you have access to a diagnostic? No fuel on the rail is a bit sus.
-
The car wouldn't run if all coils were open to ground. Perhaps this is from the compression test which has recently been done.
-
VeiRoNv2 replied to the thread Random stutter/misfire.Replace the coils lol inspect the coils wiring and pins first tough.
-
VeiRoNv2 replied to the thread Track Rods or Steering Rack?.Only way to tell for sure it's to take both the inner and outer track rods out and inspect the joints and the rack itself. I haven't...
-
VeiRoNv2 replied to the thread Random stutter/misfire.I measured on mine and it was around 165 psi but with throttle body open so possibly 120 about right but haven't tried with closed throttle.
-
You've said your brake pedal was spongy, and that you can press the pedal to the floor with minimal effort which suggests there's still...
-
VeiRoNv2 replied to the thread Silverstone Edition 200 - AST 5100.Yeah I can't hear any noise from my V6 airbox either,I think the plastic housing dampens the noise quite a bit, fiberglass or carbon...
-
VeiRoNv2 replied to the thread Stupid mistake: Have I now got to remove the inlet manifold?.Was it fine before? If so probably left something unplugged.
