VeiRoNv2's latest activity
-
VeiRoNv2 replied to the thread Fast Road/Track Ultra Red 197.Few things to update. Stole the idea from some Toyota model to clip the oxygen sensor wire,might save it from rubbing against the... -
Issue now resolved and fixed. 62mm / 64mm x 95mm sleeve is needed for a standard 200 exhaust system. ID is 60.5mm Changed both them...
-
Hi! Last summer i bought my 197. This forum helped me to learn a lot about the car, especially the progress/project threads. So i...
-
For next month plan is: - B14S - Powerflex bush for engine and suspension. - New Top mount. - New bearings - Hel Break lines - New...
-
Hi. So my project just started.
-
What a day Moving as well Back out tonight to get the radiator and hoses fitted
-
We went to Mallory Park yesterday for a Javelin track day. We had not been to Mallory Park before so for £179 (plus an additional...
-
VeiRoNv2 replied to the thread Glacier White 200 Cup.I used a pressure bleeder put a pipe on the bleed nipple into a bottle and took the clip most of the way out and push the slave apart...
-
VeiRoNv2 replied to the thread Speedo bulb type.you can buy a kit from this link...
-
I would keep your current engine until it blows up and then swap it. Clios are really quick round corners when they are set up properly...
-
VeiRoNv2 replied to the thread Speedo bulb type.it has leds soldered on the board so not as easy as a bulb to change,I got this kit to replace them but never got around to fit it as i...
-
We went to Donington Park for a track day with Open Track today. The track day was on the GP circuit which we had not done before...
-
-
VeiRoNv2 replied to the thread Power tool recommendations please.https://www.ebay.co.uk/itm/252124947560 I use this altough bought 3 years ago so I think there is new better models out but this does...
-
Fuse box on, first test with the battery hooked up and stuff seems to be working so that's a good start with my history with electrics...
