turkie172's latest activity
-
Tturkie172 replied to the thread Engine running bad.you hit the dear did anything go into the belts or alternator check the alternator voltage and clear the code see if it comes back.
-
Tturkie172 replied to the thread Pop rivets.
-
-
Tturkie172 replied to the thread Pop rivets.Look at the parts and google the part numbers one will tell you the diameter and thickness of the rivets. Clio front bumper Clio 200
-
Tturkie172 replied to the thread Cutting out at high revs..Yea there was a bit of the Renault clip program that allows a catalytic converter operational test it was only used when the second...
-
Tturkie172 replied to the thread Cutting out at high revs..We are at Caldwell park at the moment racing phone and internet are weak here I’ll be home Tue evening. I think it should be 100 ohms...
-
Tturkie172 replied to the thread Cutting out at high revs..I picked up a car that would backfire/pop and refused to go above 4,500 RPM it turned out to be the spark plugs so don't ignore the...
-
Tturkie172 replied to the thread Cutting out at high revs..Can bus works on resistance between the two wires for communication I can't see why that has been done you said the second Lambda was...
-
-
Tturkie172 replied to the thread Cutting out at high revs..I see the loom has been modified that connection just so happens to be can bus for engine, ABS and Dash
-
-
Tturkie172 replied to the thread Cutting out at high revs..
-
-
Tturkie172 replied to the thread Cutting out at high revs..UPC data
-
Tturkie172 replied to the thread Cutting out at high revs..
-
-
Tturkie172 replied to the thread P0004 'Fuel Volume Regulator Control circuit High' can use some help.The fuel pump can be changed blindly by disconnecting the fuel filler hose from the tank and lowering it at that side I have done it. I...
-
Tturkie172 replied to the thread Headlight & Fuse box (engine bay) query.I think it is Xenon headlights I have an engine bay loom I can follow the wire but it is not connected on my car
-
Tturkie172 replied to the thread Drive Shafts.Well I have bought drive shafts before DK55.098 Drive Shaft £ 93,81 DK55.103 Drive Shaft £111,55 GBP
-
Tturkie172 replied to the thread Turn steering and start fault.I've seen this on a lightly hit car first you need to get a diagnostic tool and see what computers you can see on the multiplex network...
