Steve.humberstone's latest activity
-
Steve.humberstone replied to the thread 197/200 subframe locating pins.Thanks Turkie, I’m going to reassemble with some bias applied, check alignment and then see what measurements I come up with. The... -
Steve.humberstone replied to the thread Decatted midpipe- plug and play?.If you’re going uprated cams and would end up on a rolling road as a result the engine light would get switched off regardless -...
-
Steve.humberstone replied to the thread Column Power steering leak.It should be an EPAS system so I wouldn't expect to see any kind of fluid other than a bit of grease. Did it taste like peanut butter...
-
Steve.humberstone replied to the thread Decatted midpipe- plug and play?.If the cat is removed and the oxygen sensor is disconnected it will throw a fault, You can get 'lambda foolers' which will screw into...
-
Steve.humberstone replied to the thread 197/200 subframe locating pins.Bit of an update, I have supported the subframe, loosened all bolts that attach it to the chassis, removed the rear 2 bolts, dog bone...
-
-
Steve.humberstone replied to the thread 197/200 subframe locating pins.It’s both the front and rear - 6 in total, will see if I can shift it this evening
-
Steve.humberstone replied to the thread 197/200 subframe locating pins.Sounds like what I had originally thought, might just drop it down and force it as far back as possible and see what impact this has...
-
-
Steve.humberstone replied to the thread 197/200 subframe locating pins.That's what I had thought, however reading into it apparently it's an issue when removing the subframe and it needs aligning with some...
-
Hi Guys, I recently had the front subframe off for a gearbox job, while it was out I also welded in some solid subframe mounts, since...
