PITA's latest activity
-
PITA replied to the thread PITAs GW 200 FF Cup.I have a spare number plate section of bumper that I’ll cut out and I’ll relieve the bumper support behind the plate section. -
-
PITA replied to the thread Joe's GW Clio 200.That’s a very healthy result, bet you’re chuffed!
-
PITA replied to the thread PITAs GW 200 FF Cup.I’m going to use some 2mm twin wall polycarbonate to make a template. It’s translucent so you can mark all the fixing points without...
-
-
PITA replied to the thread PITAs GW 200 FF Cup.Small update: The larger intercooler spec has been finalised and will go into production. They’re going to use my car to make a new set...
-
-
PITA replied to the thread K20 my Clio.Let me know what you want for it, I may be interested for a forged build
-
PITA replied to the thread Cup vs Non cup?.0.05cm thicker ARB. The 200 cup and cup pack are thicker still 21mm IIRC
-
PITA replied to the thread R20 BTG - Supreme Motorsport Track Car Build.As @suj says you may or may not get some clearance issues on the OSR. Mine was close but others have had to knock the panel in slightly.
-
PITA replied to the thread R20 BTG - Supreme Motorsport Track Car Build.What do you want to know? I’m currently running 3.5 degrees of camber and 6 degrees of caster with them.
-
:oops:
-
-
PITA replied to the thread Wheel Arch “Bag”.Same on mine
-
PITA replied to the thread What's wrong!?!.Have a look at cylinder 4s coil pack for water ingress, the washers tend to leak onto them causing water to pool above them. Cylinders...
-
PITA replied to the thread 200 Front Bumper Support Panel.eBay The non RS one looks identical to the RS one for the same facelift years
-
PITA replied to the thread Joe's GW Clio 200.196
-
PITA replied to the thread R20 BTG - Supreme Motorsport Track Car Build.I’m running very similar geo with corner weighting and it’s awesome! I’m sure you’ll love it
