LiamP's latest activity
-
LiamP replied to the thread Cutting out at high revs..I would try measuring the resistance between the canbus high/low (OBD port has a tail), should be 120ohm, give those repairs a wiggle... -
So booked a track day at the Ring for October which means time to make changes to the car once again. Going more track focused over the...
-
LiamP reacted to Helpimonfire's post in the thread 2006 Deep Black Track Shed BudgetBoltOnBuild with
Like.
Car survived a day of abuse at Snetterton on Tuesday. 2 different drivers, 70+ litres of fuel, a litre of oil, a set of tyres and brake... -
LiamP replied to the thread Cutting out at high revs..Yeah, I have done it using one of the CLIP copies. However I do remember reading about a way to trick the TB into a reset by holding...
-
LiamP replied to the thread Cutting out at high revs..Have you tried running RZ005 reprogramming? It goes through a reset of high/low stops.
-
LiamP replied to the thread Cutting out at high revs..Have you looked at the throttle body and pedal connections and the plug to the ECU? From memory I think the engine will cut out like...
-
LiamP replied to the thread Throttle Pedal Potentiometer Bank 2 Reading Help.I don’t think the 89% max is an issue as it’s learnt the high stop is at 89% of the full travel (0-5v) From memory mine was 87% however...
-
Fairly sure that's what Alex said to me too :tearsofjoy:
-
The Nurburgring 2025 trip went really well. We set off on Friday and when we got to the tunnel I realised that I had picked up the...
-
@EthanMenace has spent the past week sorting out the gearbox. After looking at the internal damage inside the gearbox we decided to...
-
We installed a rally style intercom in the car today. After 4 years of doing track days we have finally come to the conclusion that we...
-
The gearbox teardown is underway. The synchros have definitely been mashed. There are remnants of a synchro sitting on a bearing in the...
-
I purchased some very expensive MSV photographs from our day at Snetterton this week. I am fairly sure if you printed out a copy of the...
-
You might be right. The thicker Millers gearbox oil only lasted one track day before it was changed to some Redline stuff. Ethan has...
-
Yesterday we went to Snetterton for a track day. The track day was organised by MSV and despite the weather being predictably sunny...