EthanMenace's latest activity
-
EthanMenace reacted to tombate911's post in the thread Albi Blue 200 >> BMW E46 Track Car with
Like.
Spring arrives which brings with it the first track day for 2025 so I have had to get the car all working ready for Oulton Park which... -
That’s the diff in. Also found hat one of the Detent was damaged and replaced accordingly. Can’t wait to get this back in the car now.
-
All ready to marry these 2 together tomorrow Tomorrows jobs mate is coming over to do the belts and give me a hand Trimming belt Aux...
-
AFR sensor installed Wastage lines in and wrapped in heatproof sleeve Turbo blanket on Out with the old and in with the new
-
Fitted the vacuum manifold Nice little bit of kit this. This will tidy up the large mess of vacuum lines that are all connected together
-
My thoughts on stuff like this, is your labour is free, so you’re not losing out if you have to replace in the future. That being said...
-
Got the gearbox off yesterday - surprisingly easy job in all honesty. Easier on the floor than using the pit too. Box has been dropped...
-
Parts starting to build up now. Mate over Thursday to do the belts then we are going to rebuild and hopefully get out for a test run...
-
It could also be an issue with the clutch plate if the pedals really hard
-
-
EthanMenace replied to the thread Glacier White 200 Cup.Ok, I’ll try that next. It probably is me doing something wrong, it was still drivable before I tried bleeding it again :chair:
-
It is a crazy amount of pressure. Thats normal. Did you try prising the slave out? So put the screwdriver in the direction of red...
-
EthanMenace replied to the thread Glacier White 200 Cup.There was an o ring missing, we managed to grab a few from a garage but then with the valve closed and the metal clip on, the pressure...
-
-
To bleed a clutch I put a pipe on that would go higher than the reservoir bottle that will stop you losing fluid the valve has two...
-
EthanMenace replied to the thread Glacier White 200 Cup.Asking for a friend… Why would brake fluid squirt out of the clutch bleed point even with the valve closed/clip in. The car worked...
