EthanMenace's latest activity
-
It could also be an issue with the clutch plate if the pedals really hard -
-
EthanMenace replied to the thread Glacier White 200 Cup.Ok, I’ll try that next. It probably is me doing something wrong, it was still drivable before I tried bleeding it again :chair:
-
It is a crazy amount of pressure. Thats normal. Did you try prising the slave out? So put the screwdriver in the direction of red...
-
EthanMenace replied to the thread Glacier White 200 Cup.There was an o ring missing, we managed to grab a few from a garage but then with the valve closed and the metal clip on, the pressure...
-
-
To bleed a clutch I put a pipe on that would go higher than the reservoir bottle that will stop you losing fluid the valve has two...
-
EthanMenace replied to the thread Glacier White 200 Cup.Asking for a friend… Why would brake fluid squirt out of the clutch bleed point even with the valve closed/clip in. The car worked...
-
Good news. everything is plugged back in on the engine side and finally the imbo light has gone out, no need for the jumper cable anymore
-
Spent a bit more time sorting some wires and hoses out and I have finally got my head round the vac hoses & boost controller
