Recent content by batori

  1. B

    Heating stuck at hot, very hot

    I didn't even know there was a premium membership until you mentioned it xD hehe Thanks. I found out it could be several reason, i eliminated 2 so far, 5 left :)
  2. B

    Check Injection - persistent

    Just to let you all know, I have changed the throttle body...did test the old one and the new one on the table connected directly to power source. The old one had a crunchy noise while the new one had no noise at all, was smooth. That solved my problem. And yes, had to change pedal too ...
  3. B

    Heating stuck at hot, very hot

    Hello, Recently my heating stuck at hot, does not change to cold when i change temperature to 15 or any other. I changed the AC pump, refill AC, changed the old heater valve motor N101029T which was all eaten up at the inside...but still no luck, cannot get it to blow cold or warm, just not...
  4. B

    Check Injection - persistent

    I think the pedal might be the case, i did take it down, check for oxidaton and wiring...didn't seem to find a problem. Here is the video of what is happening and it seems when creating the INJECTION FAULT error after the CHECK INJECTION error that the card starts normally after a 1-2 times...
  5. B

    Check Injection - persistent

    Ok, today i managed, i guess to clear the error with torque pro. I put key in, press start, contact on, press pedal throttle to the end and i get error : injection fault, then i reset the ecu error via torque. After that i start the car i get rpms getting up to 2k rpm and i get traction...
  6. B

    Check Injection - persistent

    I meant to the red 8000 I red somewhere it goes up to 8250, not sure rhe dash shows rhe exact rpms, anyhow when having those problems in first gear blocks at 6000 like when you reach 8000 red. Sorry i dont jbow how you call the moment when it reaches 8000 red and then does that sound heheh
  7. B

    Check Injection - persistent

    After restartinf the car several times the error is gone for a while but then again in that case sometimes it foes in first gear only to 6000rpm, in ofher gears up to 8000 as usual, sometimes it goes in all gears up to 8000... I got the codes, we doubt the throttle pedal Image attached.
  8. B

    Check Injection - persistent

    Yeah, i'll try to get to the code. No other lights came on but the check injection. The time he did put that new TB "code" i had no problem, well at that time it showed only once, for the first time and it was while i was driving and changing gears at 8000rpm xD , just got the code then... He...
  9. B

    Check Injection - persistent

    Im not sure what code did the mechanic get but he told me its the throttle body, he cleared the error and told me he put the code or something, to make it look like he installed a new throttle body. Then he told me it could be the ecu too. That mechanic worked on clio r3 for alot of time so i...
  10. B

    Check Injection - persistent

    Hello, Recently my car started to give CHECK INJECTION error, which could be reset by the mechanic and everything would work fine. It happend once, after that no issues for a month or so. The next thing i know is as soon as the wheater got colder im having issues with the error when starting...
  11. B

    Hello from Croatia :)

    Hi, I'm a clio 197 owner from Croatia. New to this forum. This is my ride :) Just recently my clutch blew up and my plus charge main fuse melted :D Miltek ex. and lowered springs