Search results

  1. Liam Gunby

    197 Aerodynamics (CFD analysis)

    This thread is awesome. Some serious time and effort has gone into all of that, so thank you for sharing it all with us! Its really good to know some of the actual science behind it. And as much as most of us probably already know most of the stuff we do is actually just for looks and not...
  2. Liam Gunby

    197. Door Handle Spacers - Door Card

    It would be awesome if someone could send a free 3d print file out ;) sod paying 25 quid plus for some. Im just useless on the 3d print editing software ha
  3. Liam Gunby

    First Track Day at Blyton Park

    Blyton is hard on brakes and tyres been there done that, if you have original brakes possible warping..... as stupid as it sounds checking wheels are done up to correct torque. Iv had wheels come loose before on track. Or it could just be a build up off brake dust causing pads to stick a bit...
  4. Liam Gunby

    Oil cooler.. have you? Would you?

    Im just going off the sound of the engine after a hard session tbh. Sounds likes theres no oil in it at all and the dephasor if sha**ed.... Not had the oil tested. Im on a high millage engine aswell so anything i can do to avoid a new engine haha.
  5. Liam Gunby

    Coil bolts, help please.....

    Hi all, So the 4 pencil coils, (ontop of the plugs for people who wernt sure) does any body know what bolt it is? Thread ect..... Basically i changed my plugs, tightened the coil back down with the dephasor solinoid bit and it went loose again.... its stripped some of the threads from the...
  6. Liam Gunby

    VVt seal, help needed asap please.

    Sorted the seal. Big screwdriver and hammer. :) Yes got it from rpd. But now another issue.... doesnt feal like the car has any vvt anymore... theres no step in revs.. its suposed to be roughly 4, 4.5k isnt it.
  7. Liam Gunby

    VVt seal, help needed asap please.

    The picture below is all i managed to remove.. it was solid... iv found out that the seal has a metal part on it too but nothing like that came off :/ i was so scared of stuff falling into the head
  8. Liam Gunby

    VVt seal, help needed asap please.

    So i have removed the old seal because it was leaking. And it came off in chunks as it had gone brittle. The new seal doesnt seem to fit in the same way i thought it would... see pics. It doesnt push down into the hole at all. Im stuck... Any help would be great. Thank you.
  9. Liam Gunby

    Cup lookalike Spoiler

    If anyone has been on the Ktec website recently they may have noticed that as well as selling the genuine Spoiler ( http://www.k-tecracing.com/show_product.asp?id=2415&appid=3 ) for 226quid. They also sell a copy http://www.k-tecracing.com/show_product.asp?id=5829&appid=3 which is alot...
  10. Liam Gunby

    200: Brakes working poorly

    I kind have the same issue on my 197. I have uprated disks and pads plus braided lines and hi temp fluid. Had the brakes bled few weeks ago too. how easy is it to replace the seals in the caliper? Im no mechanic but can do most bits. is there a guide? Plus anyone got a link to the kit? Thank you.
  11. Liam Gunby

    Missfire?!?!?!?!

    I still have the issue. But i have put it down to the fact i have a aftermarket exhaust and i need the car mapping to smooth it out.
  12. Liam Gunby

    AutoFinesse Discount Link!!!!!!

    Autofinesse have released their own DA polisher if anyone is interested. Its 130 quid retail. They also have their caramics range out too. the new range is seriously good but require the car to be out of the elements for 4+ hours so it can set correctly.
  13. Liam Gunby

    Rentune

    Rentune, Leicestershire. So my experience with these guys. To be completely truthful they are brilliant. Summer time 2018 i took my car to them for Cambelt, Dephasor, Aux Belt, WaterPump ect. The full kit i got from RPD when it was discounted. They were reasonably priced (Cheaper than my...
  14. Liam Gunby

    High Mileage engine & Oil

    Hello everyone, So my 197 has done 115 thousand miles.. Its been regularly serviced before i owned it and since i have had it. Normal oil is 5w-40 correct. Last time i changed it with Gulf advanced synthetic stuff. With such high mileage would i be beneficial to put something abit...
  15. Liam Gunby

    Gear Selection Issue. Yes another thread. Help please :)

    Thanks for the input guys. I was thinking its just the clutch that has issues. Needed other peoples opinions tho :) Now to get some money together. Thanks again.
  16. Liam Gunby

    Gear Selection Issue. Yes another thread. Help please :)

    So it only slightly crunches when going into 5th gear. No other time. Engine off I can select gears fine. It does judder sometimes yes when I pull off but I always put that down too that sensor on the inlet manifold being faltly.. So stuck haha
  17. Liam Gunby

    Gear Selection Issue. Yes another thread. Help please :)

    Morning all, So basically my 197 has had a gearbox in the past (before i bought it, got receipt) Its now done over 105tho Miles. Symptoms are as follows- Wont Select gears up or Down if changed quickly. Mainly Downshifting. - Works ok ish when speed is less than 40MPH. - Changing...
  18. Liam Gunby

    LY 200 and white 197 in Newark Last Night

    It did look unmolested and very clean.... It was the day it first started raining again after the heat wave. Mines got Big black sport decals down the side.. It may not have been you but car was exactly the same haha
  19. Liam Gunby

    LY 200 and white 197 in Newark Last Night

    was it you that waved at me last week while i was stuck in traffic at the know-how roundabout in Newark?
  20. Liam Gunby

    Gearbox Oil Change.........

    I completely missed that thread... but the pics don't work :( i only really need a pic of the fill point. Thanks matey