Search results

  1. shakey_hand_man

    Stage 1 ignition

    Sorry what's this? Never heard of it before
  2. shakey_hand_man

    map sensor help

    There are plenty of people breaking 197/200's on eBay -should be able to get a second hand one relatively cheap
  3. shakey_hand_man

    Terrible dyno result

    Conor197 where are you based?
  4. shakey_hand_man

    Possible fueling problem. PLEASE HELP!

    Sounds like ignition related, plugs and/or coils
  5. shakey_hand_man

    Exhaust started to get hot hot hot and engine seems to be running warmer than usual

    Hook the plugs out and compare them.. Look for any signs of det. As mentioned above that'll put your exhaust temps up. Does it pull okay??
  6. shakey_hand_man

    Clio turbo 197

    You could always take the gauge pod apart and paint over the LEDs as a worst case scenario
  7. shakey_hand_man

    Clio turbo 197

    Depends how it's wired up, if your using standalone/piggyback to run ignition, injection etc then without serial bus you'll always get lights
  8. shakey_hand_man

    Engine misfire

    Knock sensor unlikely due to how it works.. Lambda could as it will effect fuel trim but this would be obvious if you data log/obd tool. Does it misfire when cold?
  9. shakey_hand_man

    Engine misfire

    Have you tried running it on idle with one could disconnected at a time? See if removing power from one makes no difference ie a dud
  10. shakey_hand_man

    Engine misfire

    Does it idle rough as well? Does it come and go? Is it running on three cylinders? -Andy
  11. shakey_hand_man

    Clio Meg RS320bhp conversion (update Meg Rad)

    Just commented on another thread with the same. Mine always ran a low setting on the fan from when it warmed up.. Also had the electric water pump on constantly
  12. shakey_hand_man

    Clio turbo 197

    Fan should be running on low setting as soon as it's warm for turbo setups. High setting when toasty
  13. shakey_hand_man

    recommended spark plugs ? RS200

    NGK BKR7EIX are the direct swap iridiums but I don't have experience of these with a NA engine
  14. shakey_hand_man

    White 200, players classic Goodwood

    As per title, looked good
  15. shakey_hand_man

    help please

    I have a full late 200 spring set and dampers from a cup if your in Hampshire area
  16. shakey_hand_man

    oil

    I always ran castrol edge
  17. shakey_hand_man

    Clio turbo 197

    Is it running standalone or sagem?
  18. shakey_hand_man

    megane 225 conversion what gearbox to use?

    Both are great options, just depends what sort of roads you normally drive.. If motorway and dual carriageway def Meg box.. A's and B's clio box
  19. shakey_hand_man

    Clio 3 Catastrophic Engine Failure - Australia

    More likely to be BE bearing failure as the loading is shared on main bearings and they are larger anyway