Recent content by IrishF1LY

If you take out the switch you can seperate the rubber from the plastic and you will see the contacts inside are probably all wet and green corroded looking, dry it out and loads of electrical contact cleaner should help it a lot.

Did you bring the car to a renault dealer or independant?, i cant believe if its that easy to hear on a video that they couldnt find it, google 'chassis ear' its a tool for finding these kind of noises, most garages have them now and they work a treat, find out if they have this and if they...

Yes it would, its definetly not just a matter of "a couple of bolts and away you go" its a days work just to remove and refit a box in a 197...and then you gotta strip the box and all bearings seals pins etc should be replaced whenever a box is opened as for the timing belt kits on ebay etc...

I hope the box will hold to!!! theres been a few changed in cars from this site for various issues and i currently have a 10 reg 200 on the ramp in work with 3k on the clock waiting for a new box slave cylinder clutch pressure plate and flywheel cause the slave cylinder broke apart and...

HaHa...thats my point...220bhp could be very usuable for someone who uses there clio everyday.... 250bhp is pushing the limits of standard parts, so why pay as said 4 grand for it to blow the engine or box or clutch etc in 6 months... 4k would buy ya an old turbo jap car with loads of...

Id be happy with a genuine real life 220bhp, as said below it would be such an increase over standard genuine bhp it would feel really fast, and hopefully at 220bhp still reliable enough and driveable enough to be used normally (normanly been not snapping your thunmbs from torque steer every...

Dont have to take the complete seat out at all......the base comes out on its own.....get on your knees and have a good look under your seat you will see 4 allen bolts in each corner,screwing up into the under side of the seat base,size 8 i think,undo these,remove the clips holding the wiring to...

Are you sure!!! Each valve neck will be a hard metal one if you do, not the usual black rubber one... If you do you dont have to go to renault but best to mention it to the tyre place because they can be snapped when taking off a tyre if there not carefull

Hey hows the carbon finish looking after been in a hot engine bay for a few weeks?................. did you ask them what its like on exterior pieces, i was trying to picture the front grills and the grills in the arches done this way, i think it would look good and save trying to keep em...

3 nice and shiny L.Y clios...... and in all the pictures not one car looks the same shade as the other next to it.... Gota love the pearl:cloud9:

I use WD-40 to get dryed in polish off plastic iv used it for years and its always worked!!!!

Very nice...love the seats...... word of advice if these have the U.P.C(fuse board) under the bonnet to the right of the battery then get at it and wrap it in plastic or put a bag around it as one of the biggest problems with the standard version of that megane is the upc getting wet and it...

Iv been thinking about putting the clio badge back on (i didnt take it off) not sure what to do!

Thanks :proud:

cheers..... mradam- ya prob is that spoiler, i like it so its staying:thumbsup: