Recent content by bebbetufs

I've had this for a few years. I didn't think much of it because I was certain nothing would be done about it.

I've had to refurbish the wing mirrors and I can't remember which glass goes on which side. Can anyone help?

Thanks. Unlikely as it seems removing the speakers did in fact solve the problem. You solved a 2 year old mystery :) I decided to reinstall the stock speakers, only to realize after removing everything related to the aftermarket stereo that I have thrown away the original door speakers. Now I...

Interesting. Have you experienced this?

Yes I did. But they have new cables so that shouldnt be a problem. however, the installation may have damaged a cable in the a-pillar connectors. I'm currently troubleshooting that. I also think I need to check the UCH computer for fault codes, so that is my next step. The system is quite...

Unfortunately, yes. At least 50 times :). Thanks anyway. I've had this problem for more than a year. I'm selling the car now and need to fix it. I would have thought the electronics in the door had failed if only one window had this problem. Since both failed at the same time I belive the...

Since installing the new stereo the one-touch windows won't reset. I've tried everything. I'm sure they are not moisture affected, as I think they worked flawlessly before installing. Both sides act up the same and won't initialize. I've tried every procedure there is, including initializing...

I found out that the wiring diagrams are on a separate system called Renault Visu (Renault Visu-schema). It conists of bunchloads of CDs with information on select models and years. I managed to find a download link that worked on what turned out to be a Croatian forum. I hope this information...

I would be very grateful if someone with dialogys could print the wiring diagrams for the following: 1. The electrical windows and the UCH computer. 2. The wiring for the heated seats. 3. If possible, the fuses in the engine compartment "protection and switching unit" I tried to install...

Thanks.I will have a look around and check it out.

I did a few searches, but possibly didn't use the correct search terms. I seem to recall a lad selling genuine parts on here a year or so back. Is he gone? What other cheap options do I have? Parts will need to be exported. I have dealt with Ktec before, but I don't think it was particularly...

Thanks. I have a garage and am confident I can get I done with my engine hoist. I need to decide whether to do it before I sell or not. I have the shocks and the front subframe off already. There is a puddle of oil on the floor from the RMS and the throw out bearing is a little noisy.

How long does it take to do this DIY? I have most of the tools needed? Do you have to remove the shocks to remove the box?

Does anyone have the part no. for the release bearing and the rear main seal?

Sorry to hear about your engine. http://www.ebay.de/itm/TOP-Renault-Megane-III-RS-Motor-F4R874-Bj-2010-21-TKM-/262079547951?hash=item3d05288a2f:g:2HEAAOxyzqdTdNyf...