Anyone noticed this in their 200t or do I have a Problem?

Pulled on to a stretch of dual carriageway earlier and accelerated full throttle from near standing through 1st, 2nd and 3rd but the car felt sluggish.
Brought up the Rs monitor and used full throttle again coming off of a roundabout back on to dual carriageway and rs monitor is only showing 3/4 of max torque being used and 150bhp.
Went out again a bit later and exactly the same thing happening, engine temperature is fine, no warning lights or messages and all fluids are topped up.
Any ideas why it could be limiting power?
 
Fuel is bp ultimate and has been run on that since we bought it, car is always warmed up fully before any more than half throttle.
 
No blockage in the air intake, filter doesn' look bad but I might change it anyway (good excuse to get the engine dynamics intake pipe and k&n panel filter).

The readings from rs monitor:
Boost 0.5bar
Oil temp 98c
Edc oil 39c
Clutch 60c
Inlet temp 25c
Air temp 11c
Torque 190nm (max at WOT)
Power 150hp (max at WOT)

Im thinking maybe boost leak or duff actuator?
 
No blockage in the air intake, filter doesn' look bad but I might change it anyway (good excuse to get the engine dynamics intake pipe and k&n panel filter).

The readings from rs monitor:
Boost 0.5bar
Oil temp 98c
Edc oil 39c
Clutch 60c
Inlet temp 25c
Air temp 11c
Torque 190nm (max at WOT)
Power 150hp (max at WOT)

Im thinking maybe boost leak or duff actuator?
Matt still in warranty take it back
 
Going to have to get it booked in to Renault.

Filled it up on the way to my mates with bp ultimate, pulled fine once then started holding back. Got it plugged in and cleared all the codes and went for a drive. Twice it pulled to the redline with full boost and power and then went back to how it was running before.
Plugged it back in and one code had reappeared (df1012 something to do with the injection system messages to the cc/sl system).
We checked all the hoses etc and built the boost up with launch control while my mate was looking under the bonnet and there's no sign of any boost leaks.
 
Did you sort this yet
mine had similar issue and dealership put in loads of software updates apparently
 
I’m sure mine still does it every now and then still but don’t have monitor
Mines in tomorrow
 
No blockage in the air intake, filter doesn' look bad but I might change it anyway (good excuse to get the engine dynamics intake pipe and k&n panel filter).

The readings from rs monitor:
Boost 0.5bar
Oil temp 98c
Edc oil 39c
Clutch 60c
Inlet temp 25c
Air temp 11c
Torque 190nm (max at WOT)
Power 150hp (max at WOT)

Im thinking maybe boost leak or duff actuator?

Matt, dunno if you’re interested but there was a guy selling the brand new ED intake pipe for half price on Facebook if you wanted me to get in touch with him?
 
Back in on 15th as they need it for a day and didnt have a car spare today
But mine does exactly the same goes like stink one second then feels like there is no boost the next
 
Could potentially be someone mapped the car before but Renault looked at all the maps and put some up to date ones in surely they would have have found signs of mapping