My 200...an old friend...

And some after photos...


View attachment 17584
View attachment 17585
View attachment 17583
View attachment 17586

View attachment 17587

View attachment 17588
View attachment 17589

View attachment 17590

Sorry for the heavy picture thread!.

So everything was sorted and I picked my car up on the 18th as planned, car was ready on arrival, invoice ready Max was excited to show me the parts, he really does enjoy his work and that is very obvious - I would say his prices are very good, I was more than happy with the work done and would be happy to have more work done as and when needed.

Regards the inlets work done I have to be honest I didnt notice a big difference on the drive home, apart from it did feel a bit 'smoother'?! answers on a post card!

Maybe the remap update at K Tec will reveal some more on this front, I did ask Max what he thought on the power it may add he was honest and said I really dont know...

Hope this proves useful to someone reading, regards the engine bay I would have loved more painted etc, think this will do for now though, cant wait to have my hoses put on now in the engine bay!.

Also have some Brembo decals to add to my newly refreshed calipers thanks to @Gordini for confirming the correct size to get.

Hopefully have another update after my K Tec visit next week...

Beautiful!
 
  • Like
Reactions: kevlar
Very nice, I like that, super shiny stuff, did you spray or brush paint the stuff as it looks very smooth?

Checked with Max, calipers were sprayed hence why they are nice and smooth. He used a vht brake caliper paint as it's quite thin he applied about 10 coats.
 
Last edited:
  • Like
Reactions: Cossers
Checked with Max, calipers were sprayed hence why they are nice and smooth. He used a vht brake caliper paint as it's quiet thin he applied about 10 coats.

That's what I hope to use on mine, used it before and it very easy to use, just need to see if I can get the right colour I'm after :smile:
 
Looks great mate. It's one of those weird mods where you are never really going to feel much out of it but it can only do good!

Good on you for getting it done.
 
  • Like
Reactions: kevlar
Those who read through my thread know I had some work done on my car in feb at K Tec and although the work done was good, to me the customer service just was not good enough - so I sent an email to Sean at K Tec - this was in a constructive manner not just an email slagging them off.

He responded super quick to be fair and did not even argue with me it was just kept very factual and he came back to me with an offer of free fitting on the sports cat, manifold and reduced fitting cost on the coolant hoses I wanted as an apology - so I agreed to get it booked in.

A few days after booking the car in, K Tec did a 10% discount on their site, due to work I missed this offer and did not realise until the sunday, so I emailed Sean and asked if they would honour the discount for me - he agreed so manged a further discount which again really helped.

On my last visit they diagnosed my manifold had a flexi blowing slightly they said its not to bad, but would need attention in the future so decided to pull the trigger on a K Tec manifold with the K Tec sports cat as my car is a road only car and I need to get it through an mot so the decat option didnt interest me.

So the manifold I went with as it appears its a very good bit of kit and should last, yes its expensive however due to the free fitting they offered to me - to me it equaled out.

Also I had fitted red silicone coolant hoses, nothing realy exciting, but I like them and continue the red theme in the bay and help tidy things up.

And last, but not least I had the K Tec (vibratechnics I presume) lower stabiliser mount fitted, I did consider the powerflex options, however again they offered free fitting on the K Tec option, so did some digging around and some people love it,some people loathe it - pretty much like the power flex options.

Also included was an update to the remap which took it to 213.6 BHP, which was a figure I had hoped for - did it take make any difference having the inlet and throttle body flowed?, I dont think it did the run they did before the above upgrades came out the same at 206 BHP as it was previously.

IMG_1960.JPG

So...this time K Tec got it right, they called me to check how I wanted the cat fitted, called me to confirm when it was done, called me to confirm my parts were boxed and in my car to collect, so I have to say thanks to Sean at K Tec.

So I collcted the car after a very slow and tedious drive there which took over 2 hours straight from work in their evil, evil, evil 1.2 clio...lord above that thing is just dreadful - I think this is part of their plan so when you pick your car up you really feel how good your car is.

Now I was prepared for the lower mount to cause a vibration, I was prepared for some extra noise from the manifold - so pulled away and yes, it definately feels more 'race' the clutch is a bit more off/on and yes I can only decribe as a thrumbing noise/vibration which was odd for the first 15 minutes of my journey hope this dies off a bit over time - the car just feels more 'stiff' oo err.

Now the manifold, could I tell there was more power, I would say yes a bit - the noise though I read another progress thread I think here who had one fitted and they mentioned it 'screamed' and yes it does around 3.5k..lord above to be honest it scared me a tad i was not ready for that howl...bloody hell!.

Yes there is definately a lot more noise, yes the Akra sounded really good, but not to angry..now its very angry...very.

Not had chance to take it out since so cant wait to get it out and fully cleaned up, however friday night I managed to get a bit of time so I decided to clean up my engine bay a bit, I then thought hmm wonder if I can manage to clean the scuttel panel out - at this point I must point out I am fecking useless at anything like this, but thought what the heck.

After some faffing about, I have limited tools I managed it thanks to the guide on here the drivers side was not that bad, but the drain was blocked ta the top, so cleaned the whole area up and the part of the drain I could get to and poured some hot water owver it - few seconds later voila black sludge under the car and free flowing.

Passenger side was just dirty and the drain was fine, so all cleaned up and back together some photos didnt get a before of drivers side foolishly - I think as the cars been garaged for most of its life this would ha

So all cleaned up and dressed with Autofinesse Dressle - looks a bit better now, just waiting on @sevenfourate and the group buy to add some CF touches!.

IMG_1945.JPG IMG_1947.JPG IMG_1949.JPG IMG_1950.JPG IMG_1951.JPG

Hope it's not been to boring - so no more mods for now, I have a few on my list, but my wife is going to kill me or even worse let me live If i buy anything else...

Oh and forgot to mention (dont tell the wife) I have finally got some black tpi bolts ready to go on and a set of mr pinks pins ready when I eventually get around to upgrading the brakes..

Also may have to contact jade about @///M and the new bilsteins weigh up my options really need to know how much it is (dont tell the wife...please..)
 

Attachments

  • IMG_1948.JPG
    IMG_1948.JPG
    1.5 MB · Views: 20