Cabasse Auditorium Tronic Unit

[Glenn]

Hi all, newbie here, I'm looking to swap out my cabasse fitted 6 cd changer to a Sony unit which has usb and aux in. I managed to remove the stereo from the dash and was greeted by a 15 pin plug and single black fitting (blue/white wire)
My question is, Is there a wiring loom to convert to my sony unit. I have looked online and am perplexed by the amount of choice, names, terminology and so on, but to no avail can i find a loom to fit this? Any help would be greatly appriciated!

 

[Glenn]

This is the back of the sony unit.

 

[DS197]

Hi Glenn, welcome to the site. The green connector in the first picture is actually an extension of the ISO cables. Behind the dash you will find two ISO connectors which go into the back of the Sony head unit. They are definitely there, you just have to look for them, which is a little tricky as the gap isn't that big!

 

[Glenn]

Hi, thanks for quick reply! So if i fish about in the gap where the stereo came out of they should be in there? Or do i have to start removing panels? Thanks, Glenn.

 

[DS197]

Hi, thanks for quick reply! So if i fish about in the gap where the stereo came out of they should be in there? Or do i have to start removing panels? Thanks, Glenn.

Yeap, you should be able to get to them by just putting your hand behind the dash. Removing the glovebox may help too, and it's only a 2 minute job.

 

[Glenn]

Brill, I'll try that. Mucho Gracias +++

 

[DS197]

No worries, let us know how you get on

 

[TomPenn]

Hi Glenn did you manage to get the steering wheel controls working? I've been told the connector is a connects 2 ctsrn005.2 but that needs a yellow plug which I cant find in my dash...

 

[Ppa]

Hi Glenn did you manage to get the steering wheel controls working? I've been told the connector is a connects 2 ctsrn005.2 but that needs a yellow plug which I cant find in my dash...

Did you ever manage to get your controls working / find solution to missing yellow connector